Close

100 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EA%B2%AC%EC%A0%81%E3%82%88%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8ago%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8eighty%20%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%CE%BA%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%E2%92%B2%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EF%BD%83%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8literary"

  • Address Bus
  • Instructions     from L-Star: Software-Defined 6502 Computer
  • This last step is going to get REALLY tedious because the Address Bus has so many lines. But this is the last step and you should be done, so keep it up just a little longer. A0: 6502 Pin 9 to FLiP pin 13 A1: 6502 Pin 10 to FLiP pin 14 A2: 6502...

  • Cree Dimming Level
  • Instructions     from Cree Dimming Level
  • Flash the Arduino with the following sketch. This is also included as a file attached to the project. int last_level = 0; bool last_state = false; bool stable = false; int count = 0; const int cutoffs[198] = {/* 1*/ 833, 831, /* 2*/ 825, 823, /* 3*/...

  • Provisioning the Raspberry Pi
  • Instructions     from GePS
  • Next, you're going to get the SD card ready for booting the operating system on the Raspberry Pi. This begins with copying the official raspbian lite image to the SD card. This is a process that can be done in many ways, and it slightly differs depending...

  • Geiger–Müller Tubes

  • Instructions     from Cosmic Array
  • I've had comments regarding the validity of using Geiger–Müller Tubes for a cosmic ray (muon) detector. Pointing out that Photomultipliers and scintillation panels are best, and yes the are far more effective. However, they are also expensive,...

  • Spectrum Analyser Code
  • Instructions     from Spectrum Analyser Code
  • SoftwareThe code can be downloaded from the project downloads page. But here it is:#include const static char ASCII[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, // 20 0x00, 0x00, 0x5f, 0x00, 0x00, // 21 ! 0x00, 0x07, 0x00, 0x07, 0x00, // 22 " 0x14, 0x7f,...

  • Cuts required
  • Instructions     from The Learner's Heliostat
  • The plywood product I used was 1/2x2x4 G1S, $37 ea before tax in Ontario in summer of 2022. For the project infrastructure, four 1" x 4" x 8' knotty pine planks would be price competitive and less work to waterproof, but less convenient to transport....

  • Code
  • Instructions     from Electromagnetic Levitation Stabilization Apparatus
  • Open a laptop with the Arduino software (https://www.arduino.cc/en/Main/Software).Download the code from https://github.com/stressmaniac/ELSA or copy the code belowConnect the Arduino to the laptop using the USB 2.0 cable.Press the upload button on the...

  • Nano Bike Alarm
  • Instructions     from Nano Bike Alarm
  • Hardware[Update: 2015/07/01 - Added additional info for those connecting the Nano Alarm to higher voltage (24, 36, 48 VDC eBike) batteries. ] NOTE- Before you start soldering, it's a good idea to plug your Arduino into your PC via the FTDI adapter and...

  • Instructions
  • Instructions     from Budget DIY ESP32 GPS Base Station and Receiver
  • Best Budget DIY GPS/GNSS Base Station using the UM980 and a ESP32Introduction The ESP32 is a versatile microcontroller renowned for its WiFi and Bluetooth capabilities. In this guide, we’ll walk you through setting up the your ESP32 development board...

  • Sigma Derby Clone
  • Instructions     from Sigma Derby Clone
  • Programming the finish switch Mega board)The finish switch Mega board will be the brains of the operation. It will come up with a 5 digit number to Serial communicate to the other boards. The 5 digit number will contain 3 pieces of information. The first...

  • USB Caliper HID
  • Instructions     from USB Caliper HID
  • //--------------------------------------------------------------------- // USB Caliper HID // // version 0.1 - incomplete, only caliper read and output to USB // structure in place. Enough to read from Caliper // and output it. //---------------------------------------------------------------------...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday