0%

0%

ucasano

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/16/2014.

Projects I Like & Follow

Hackaday Prize 2019

A Raspberry Pi-based console - Made for retro game emulation.

Portable Retro Game Console with 7.9-inch display

Hackaday Prize 2019

The Probe-Scope is an open source 60MHz 250Msps oscilloscope probe with all guts built right in, that plugs directly into your PC via USB

60MHz Bandwidth 250Msps Probe-Scope

Hackaday Prize 2019

A multimeter, based on the STM32F373, which can measure voltage, current and power (both bipolar and DC or true RMS with multiple ranges).

STM32 Open Source Multimeter

The standard air conditioner not connected you already have can be hacked to be used with a smartphone

Normal air conditioner becomes wifi controlled

I am in the process of implementing an autopilot on my 42' Uniflite Aft Cabin Cruiser based on the original 1984 hydraulic steering system.

OpenCPN Chart Plotter /w Autopilot and Waypoints

Timo Birnschein

Hackaday Prize 2019

DIY remote controller (transmitter) with embedded video stream, multiple wireless protocols, touch screen, hall effect gimbals and more...

OpenRC Transmitter

Vitor de Miranda Henrique

Look mum, no ADC!

FPGA + 3 R + 1 C = MW and SW SDR Receiver

Alberto Garlassi

Design walkthrough and evaluation of a flyback converter from scratch

Nixie Tube 170 V flyback DC-DC power converter

A Z80 homebrew computer with 64KB SRAM & 32KB ROM (with BASIC), TMS9918A VDP (video) and AY-3-8910 PSG (audio)

LM80C Color Computer

Leonardo Miliani

Hackaday Prize 2019

oshw keystroke injection device ( badusb )

PocketAdmin

Radik Bechmetov

Hackaday Prize 2019

Minty Z80 is a system with virtualized I/O and minimum component count in an Altoids Tin.

Minty Z80

6J2 vacuum tube preamp with 3.3V filament and plate voltage

Vacuum tube amplifier supplied entirely by 3.3V

Albert van Dalen

Hackaday Prize 2019

How to build an adjustable switching power supply using LM2576 [Buck Converter, CC-CV]

A variable switching power supply using LM2576

An analog functions generator, mostly based on transistors (with small addition of some most popular ICs like LM358 or 78xx)

Transistor analog function generator

Hacking the "I can solder" pin with a fancy steampunkish neon bulb lamp and a high voltage joule thief

I can hack – Pin

A re-creation of a Cosmic ELF computer, Coded in SpinalHDL

FPGA Cosmac ELF

A MicroPython gaming system featuring a Wemos D1 mini, OLED display, joystick, buttons, fancy LEDs and a buzzer.

GamerGorl

Sometimes you need to plug things in backwards.

The Real Single Transistor Latch

View all

Bits

Kris Winer wrote 07/09/2018 at 15:37

Thanks for following my Ultra-Low Power LiPo Charger project!

Are you sure? yes | no

roelh wrote 04/19/2018 at 13:57

Hi Ucasano, thanks for liking the One Transistor Flipflop !

Are you sure? yes | no

Dr. Cockroach wrote 09/13/2017 at 17:13

Good afternoon Ucasano and thank you for your follow and like of my #The Cardboard Computer - IO is my name adventure :-)

Are you sure? yes | no

Mahesh Venkitachalam wrote 04/23/2016 at 11:03

Thanks for following tinyDriver!

Are you sure? yes | no

roelh wrote 09/17/2014 at 19:55

Hi Ucasano, thans for the skull for my spectrum analyzer !

Are you sure? yes | no