0%

0%

Anders Nielsen

Obscure IC enthusiast who likes shiny lights

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 09/27/2021.

My Projects

2021 Hackaday Prize

Complete 6502 single board computer with 50x29 lines "VGA" output and PS/2 input

ABNielsen.com 6502 SBC

Things I've Built

3 cent PMS150c driving 300 RGB LEDS

So.. How useful is a 3 cent microcontroller? Plenty for WS2812b "neopixel" LED's

Projects I Like & Follow

A near-Arduino Nano form factor and Arduino compatible board based around a "better" and cheaper AVR MCU (currently an ATtiny1616)

The Launchpad - A $2 Arduino Nano alternative

Clyde D. Corpuz

A Z80 based computer, modular in design. Well build and thought out.

Interak Z80 Computer

Hackaday Prize 2019

Small magic pcb for moving miniature cars, trains or satellites :-)

Ant highway - linear motor for micro cars

1/2 Watt stereo audio amplifier with extra gain and loudness control.

LM386 stereo audio amplifier

carbono.silício

Too simple for a project page & which may never happen.

Silly hardware wishlist

lion mclionhead

Tiny IOT Solution based on Arduino& SIM808 GPS/GPRS

IOT- SIM808 GPS Tracker Based on Arduino

Use your Wemos motor shield with steppers motors I2C custom slave interface

WEMOS Motor Shield firmware for steppers (I2C)

Hackaday Prize 2019

This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32

Electric Bobby-Car

How I added a 500W heater to my 3D printer to enable reliable ABS printing.

Enclosure Heater for 3D Printer

Easy to use Arduino Uno Shield to support your rockets from the ground!

WOOF ROCKET LAUNCH COMPUTER V4

Canine-Rocket-Technologies

Commodore 8568-inspired (and mostly compatible) video core for driving VGA-type displays.

VDC-II

Samuel A. Falvo II

A USB HID gamepad integrated into a phone case.

Cuttlephone: Gamepad Phone Case

An 8-bit TTL computer with 8 bits of address space.

Boxer-1 TTL Computer

2021 Hackaday Prize

Roamer is a self-charging, switch free, capacitor powered, wandering robot companion.

Roamer, the Self Charging Companion Robot

3D printed toroidally wound axial flux permanent magnet air core motor. 3DTAFPM?

3D Printed Axial Flux Motor

Adapting the keypad from a Soviet mechanical calculator (Быстрица-2) to generate digital signals.

Mechanical keypad for digital use

deliver the received images to the user through the ngrok from anywhere in the world with esp32-cam.

How to Access ESP32-CAM Worldwide using ngrok

On this project I will show you how to measure the speed of movement of an object using ultrasonic sensor.

Speed Measurement Using HC-SR04 Ultrasonic Sensor

mircemk mircemk

View all

Bits

Samuel A. Falvo II wrote 11/10/2021 at 18:24

Thank you for liking and following my #VDC-II project.

Are you sure? yes | no