0%

0%

bilalamjad140

Embedded Systems Engineer

Pakistan

Following Follow me

Similar accounts worth following

This user joined on 12/28/2021.

Projects I Like & Follow

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

Low cost ventilator for standalone use during the Covid-19 pandemic

Low Cost Ventilator

Samples all 6 metrics the EPA uses to calculate Air Quality Index: 2.5 & 10um particulates, O3, CO, NO2, and SO2, and calculates AQI.

A More Complete Air Quality Monitor

Hackaday Prize 2019

We are seeing a lot of drones that have obstacle avoidance and hand control feature, is a toy or video drone. Let's learn it!

Make a Hand Control Drone

Stream Deck, but utilizing various Raspberry Pi's!

DIY Stream Deck With Raspberry Pi (PiDeck)

Add Bluetooth speed output to treadmill. Arduino on ESP32 and Treadmill Speed sensor. Zwift compatible with realtime Webpage stats.

Add Bluetooth to Treadmill

Easy to use Arduino Uno Shield to support your rockets from the ground!

WOOF Model Rocket Launchpad Computer V4

Canine-Rocket-Technologies

Hackaday Prize 2020

This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.

Open Exosuit for Differently Abled

3D printed toroidally wound axial flux permanent magnet air core motor. 3DTAFPM?

3D Printed Axial Flux Motor

Attempt to build a 4 axis CNC controller from the Beaglebone black

Beaglebone CNC controller

Hackaday Prize 2020

A smart cloud connected energy meter for easy estimation and billing of power consumed powered by AWS data analytics

Smart Energy Meter

The project to introduce how to use Docker Pi series of Sensor Hub board about IOT by Microsoft Azure

Docker Pi series of Sensor Hub board about IOT

433Mhz RF Remote Control based on ATtiny13A and SYN115

TinyRemote RF

Hackaday Prize 2020

High altitude weather balloon hardware in the form of stack-able RPi hats

RPi Based High Altitude Weather Balloon Hardware

Aditya Mukherjee

IoT Socket (ESP8266 + Power Supply + 2 SSR) / Orange Pi Zero (MQTT Broker) / iOS App (Controller)

IoT Controller

A 3D Printed Mechanical Seven Segment Display: Design and Test.

A 3D Printed Mechanical Seven Segment Display.

I will tell you how to make bluetooth RGB LED control using Arduino uno which can be control from mobile.

How to control RGB LED from bluetooth & arduino

A 3D printed GT2 Profile TPU belt with PLA Sprockets.

3D Printed GT2 Profile TPU Belt with PLA Sprockets

View all

Bits