• Creatbot 3D Printers

    02/21/2021 at 16:50 0 comments

    3D Printers Comparison

    Creatbot 3D PrintersCreatbot DX 3D printerCreatbot DE 3D PrinterCreatbot D600 3D PrinterCreatbot F160 3D PrinterCreatbot F430 3D Printerpeek-300 机型草图f1000 机型草图
     DX  
    DX+
    DE
    DE+
    D600

    D600Pro

    F160

    F160-PEEK

    F430PEEK-300F1000
    Build Size (L*D*H)300*250*300 (520)mm400*300*300 (520)mm600*600*600mm160*160*200mm400*300*300mm300*300*400mm1000*1000*1000mm
    Shaft StructureCross AxisCore XYGantry (Linear Module)Core XYGantry (Linear Guides)Gantry (Linear Guides)Gantry (Linear Module)
    Filament Diameter1.75mm (3.0 optional)1.75mm (3.0 optional)1.75mm1.75mm1.75mm1.75mm1.75mm
    ExtruderGeared RemoteGeared RemoteGeared Direct DriveDirect DriveDirect DriveDirect DriveGeared Direct Drive
    NozzlesDouble (Max.3)Double (Max.3)DoubleSingleDoubleDoubleDouble
    Best Printing Speed45mm/s45mm/s45mm/s60mm/s55mm/s60mm/s60mm/s
    Resolution0.05mm0.05mm0.05mm0.04mm0.04mm0.04mm-0.4mm0.1mm
    Layer Resolution0.02mm0.05mm0.05mm0.01mm0.02mm0.05mm0.05mm
    ScreenTouch 4.3"Touch 4.3"Touch 4.3"Touch 4.3"Touch 4.3"Touch 4.3"Touch 9.7"
    Nozzle TemperatureMax. 260°CMax. 260°C260°C+420°C260 (Max.420)°C260°C+420°CMax. 500°C260 (Max.420)°C
    Hot BedMax. 100°CMax. 100°CMax. 100°CMax. 150°CMax. 140°CMax. 200°CMax. 100°C
    Hot Air System--Y (70°C) ProY (70°C) PeekY (70°C)Y (120°C)Y (60°C)
    Filaments Drying--Y (45°C/65°C) Pro--Y (45°C/65°C)Y (45°C/65°C)
    Air Filtration--Y-YYY
    Emergency Stop--Y--YY
    Servo Motor--X/Y---X/Y/Z
    Bed levelingManuallyManuallyAutomatic ProManuallyAutomaticAutomaticAutomatic
    Storage MediaUSB DiskUSB DiskUSB DiskUSB DiskUSB DiskUSB DiskUSB Disk
    Fully EnclosedHalfHalfFullFullFullFullFull
    Max. Power300W360W1000W/4000W Pro340W1500W3000W4000W
    Input Voltage110V/220V110V/220V220V110V/220V110V/220V220V220V
    Packing Size550*500*670(870)mm720*560*670(870)mm1000*1030*1300mm470*420*600mm750*580*720mm650*600*750mm1910*1510*2205mm
    Packing Weight35(40)kg45(55)kg180kg25kg62kg100kg640kg
    Creatbot F160-PEEK
    Max. Nozzle TemperatureF160: 260 ℃
    F160-PEEK: 420 ℃
    Max. Bed Temperature150 ℃
    Max. Chamber Temperature70 ℃ (F160-PEEK)

    CreatBot F430
    Max. Nozzle Temperature420 ℃
    Max. Bed Temperature140 ℃
    Max. Chamber Temperature70 ℃