0%

0%

Dylan M. Kozicki

Software Engineer, maker, controller and keyboard enthusiast.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/27/2020.

Projects I Contribute To

[WIP] Keyboard based on Ergodox. But wireless?

Aerodox

simon-merrett Simon Merrett

Projects I Like & Follow

Hackaday Prize 2019

An Off-the-grid messaging system.

Skrypt

Internet radio and BT speaker in a small form factor with minimalistic user interface

ESP32-based internet radio and bluetooth speaker

Add a second brain to your Arduino Mega

RetroShield for Arduino Mega

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

alex-rich Alex Rich

Use your Wemos motor shield with steppers motors I2C custom slave interface

WEMOS Motor Shield firmware for steppers (I2C)

The 2018 Hackaday Prize

This project will give you full gesture control of any virtual Hero you like with a simple set of inexpensive devices using sensors on RPi

Immersive VR on Rpi to control a Hero with sensors

jeanperardel jean.perardel

Stuck between the choice of mobile, low power VR and stationary, PC grade escapism, the best choice was clearly to mash the two together.

Upgrade-Ready Virtual Reality Backpack

[WIP] Keyboard based on Ergodox. But wireless?

Aerodox

simon-merrett Simon Merrett

The 2018 Hackaday Prize

Have some old phones lying around? Thinking what to do with them? Here's how you can use them.....!

Convert your old phone into a remote switch

vishwas-navada-b Vishwas Navada B

My take on an autonomous satellite image collector grabbing from NOAA 15/18/19. (Leave Behind - Collection Device)

NOAA LB-CD

nate-schroeder Nate Schroeder

YaaCWk, a computer less Morse coder and decoder with Memory

YaaCWk, Yet Another Arduino CW Keyer

federico-pietro-briata-iz1glg Federico Pietro Briata, IZ1GLG

AI Based Object Tracking Robot Using Arduino and HuskyLens

Arduino AI Object Tracking Robot

jithin-sanal Jithin Sanal

A CNC machine made using PLA and a common 3d printer. All of the software & electronics are open source or off-the-shelf components.

3D Printed CNC

Experiments with polyphonic pythonic tone playing

Adventures in Bleep Bloops with CircuitPython

Amplified nRF52832 development board featuring 30x higher (!!!) transmission power than a regular nRF52832. AND it is Arduino compatible!

N32 Long range Bluetooth development board

nikolaj-andersson-nielsen Nikolaj Andersson Nielsen

The 2018 Hackaday Prize

Simple Breakout Board with Winbond Flash Onboard connected SPI1, Pins for SPI-LCD on SPI2 to transfer ColorFonts and BigFonts between them.

Stm32f103 LCD Breakout

RTL-SDR dongle connected to a 137MHz V-dipole capable of receiving NOAA automatic picture transmissions and ISS broadcasts.

NOAA Automatic Picture Transmission RX

aditya-mukherjee Aditya Mukherjee

LED Flasher with 3 components

Make a Simple LED Flasher

Electroniclovers123

View all

Bits