0%

0%

OlivierD

I like playing with Arduinos,ESP32, STM32 devboards etc..

Montreal

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 04/29/2021.

Projects I Like & Follow

Mouse Whisperer is a small development kit that is based on ATtiny85. It will act like a physical mouse and draw circles when you're away

Mouse whisperer

andriy.malyshenko

A simple to build, inexpensive PCB drill press that is highly accurate with light and foot pedal.

Highly Accurate Really Cheap PCB Drill Press

w_k_fay w_k_fay

AIRAMP is a retro style music player for desktop based on the legendary Winamp media player software...

AIRAMP: Bringing Winamp Into The Real World!

Pool temperature monitor using PVC pipe, ESP32 and a DS18B20

Pool Temperature Monitor

A device based on PZEM-004T that monitors power, current, voltage, frequency, etc.

Power Monitoring

2021 Hackaday Prize

Ultimate Work-from-home Workstation - optimized for days long sitting and coding / board layout work. Without taking much space

Throne of Dev

Peter van der Walt

Industrial control in a humid environment

Mushroom Growing Control System

Capt. Flatus O'Flaherty

ESP32-CAM sends email with a pic attached every half hour while we are away and if it's bright enough.

ESP32-CAM emails picture

nodemcu12ecanada

I'm developing a portable open source CPAP machine to address the current issues of affordability and access to these machines.

Open Source CPAP Machine

A variable frequency oscillator (VFO) is a necessary component in any tunable radio transmitter or receiver.

ESP32 VFO 10 KHz-160 MHz with Retro Analog Scale

mircemk mircemk

A multi-track, multi-layer Audio Looper for use in a iive Guitar performance setting running on an rPi in bare metal with a 3D printed case.

rPi Bare Metal Audio Looper

Patrick Patrick

100 kg / 215 lb pushing/pulling force, 7mm/s piston speed, 100mm stroke (adjustable limitswitch)

3D printable linear servo actuator

SquaryPi and SquaryFi, embedded systems from SB Components

SquaryPi and SquaryFi, embedded systems

kamaluddin Khan

Robotic wrist with cycloidal gearboxes powered by NEMA 17

C.L.A.W (Cool little articulated wrist)

Allows a Raspberry Pi to be supplied by a 12 volt battery. Push button power on, power down, and auto safe shutdown on low battery.

Battery Power System for Raspberry Pi

SB Components launched LoRaTM HAT for Raspberry Pi which support 915MHz | 868MHz | 433MHz with Original Semtech SX1262 & SX1268

LoRa HAT is Finally Out! Supports 915MHz | 868MHz

kamaluddin Khan

A simple audio only variometer (rate of climb indicator) for hang glider or paraglider use

Variometer Audio-Only for Hang Gliding

Single Cell Li-Ion/LiPo Battery Fast Charger (3A)

IP2312 Li-Ion Fast Charger

View all

Bits