0%

0%

SammyJ

maker, Mech E grad, I also enjoy software + electrical.

Minnesota

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/20/2023.

My Projects

I use my phone to take videos of myself. But I kept dropping my phone. I built a stand to mount my phone anywhere.

I Built a Magnetic Phone Stand

Projects I Like & Follow

The 2018 Hackaday Prize

A smaller and cheaper open source brushless motor

PCB Motor

carl-bugeja Carl Bugeja

The 2016 Hackaday Prize

A $200 smart Linux drone with the Pi Zero and the PXFmini autopilot shield.

Pi0drone

vctor-mayoral-vilches Víctor Mayoral Vilches

Hackaday Prize 2019

Based on a large (60mm) linear CCD I want to build a digital back for a medium format camera. A Teensy 3.6 will be used as main electronics.

Digital Scanning Back with Linear CCD

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

irene-wolf Irene Wolf

Emulate Citroen's Lexia / Actia Diagnostics tool to query the CAN bus and log the results to SD card.

CAN Diagnostics Logger with Arduino CAN shield

Hackaday Prize 2020

Wish your loved one with this Happy Birthday Music with arduino Happy Birthday with arduino code

Happy Birthday Music Song Using Arduino Uno

spark-buzzer spark buzzer

This give you trick to how you can Render your PCB in 3D image using Eagle3D and POVRay.

Render 3DPCB using Eagle3D and POV-Ray

brijesh-sondarva Brijesh Sondarva

This will emulate the AVR code right out of the .ELF file

Arduino ATmega 328 Emulator

I use the Ada language on a STM32F4 to turn an old hard drive into a solenoid engine.

Software controlled solenoid engine

Fabien-Chouteau

Bring SailfishOS and Nemo Mobile operating systems to Raspberry Pi 2

SailPi

aleksi-suomalainen Aleksi Suomalainen

Supplyframe DesignLab: 2022 Hackada…

A fully open-source digital power electronics technology framework for fast prototyping switch-mode power supplies

DIY Power for all - OwnTech

jean-alinei Jean Alinei

Arduino IDE is also available in Mobiles, We can program any MCU using this. This supports over 100 type of MCU boards.

How to Program Arduino and ESP using Mobile device

sagar-001 Sagar 001

This unusual 3D printer configuration is easy to build and the most inexpensive to operate with open-source hardware and no consumable

Unusual Bottom-Up 3D printer

nicolastranchant nicolas_tranchant

Pixel art clock with customizable faces and web data fetching

Pixel Clock

Idea of combining Acryl and LEDs with printed circuit boards to create a PCB art object.

ATOMPUNK ROCKET LAMP MADE OF BARE PCBS AND LED-LIT

A small(er) Vortex Particle separator that can be easily 3D printed. Use with a 2" or 1.25" (adapters needed - can be printed) vacuum hose.

3D Printed Vortex Particle Separator for Shop Vac

aaron-p Aaron P.

An attempt to make a mechanical low-resolution cube that (together with others) could reorganize into arbitrary shapes.

Telescopic Cube: Low-res programmable matter

peter-jansen peter jansen

Create a webcam with a "W5100S PoE module" without additional power supply

W5100S PoE web camera

View all

Bits