0%

0%

Lucas Phillips

A person who is eager to learn

Christchurch

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/10/2020.

Projects I Like & Follow

Wireless packet radio interface for HF/VHF/UHF transceivers, using ESP32 as KISS TNC or audio relay for use with soft modems

ESP32 TNC and Audio Relay for HF/VHF Packet Radio

ryan-kinnett Ryan Kinnett

Hackaday Prize 2019

MIDI electronic portable practice hurdy-gurdy: It's always in tune.

The Digi-Gurdy and Digi[Nerdy]Gurdy

All Sky meteorite camera build under 150$.

Cheap All Sky camera project with Raspberry Pi

Just for the sake of making it happen, I've designed an open-source TOMU form factor ESP32 design. It fits in a USB Type-A port.

FEMU - An ESP32 Wi-Fi/Bluetooth board in TOMU form

A fully hardware debounced rotary encoder.

Hardware Debounced Rotary Encoder

Hackaday Prize 2020

Mission "Wifi" Impossible > Bring Long Range 5G and 2.4 G WiFi Backed By A 1 Gigabit Fiber To The East Brainerd EF-3 Tornado Disaster area.

Open Sky Anchor WiFi Drone Brings The GIG

josh-starnes Josh Starnes

Tomographic scanner using my X-Ray machine, a simple motor to rotate the object and a reconstruction software

X-Ray CT Scanner

francisco-piernas Francisco Piernas

Stuck between the choice of mobile, low power VR and stationary, PC grade escapism, the best choice was clearly to mash the two together.

Upgrade-Ready Virtual Reality Backpack

Board design which makes it easy to attach LED light strips (APA102). No soldering is required by the maker who is using this board

Board for modular LED wearables

sander-van-de-bor Sander van de Bor

Super IMU

laetitia-bel Laetitia BEL

By combining 3d parts, gyro, and a stepper, I made a programmable foot pedal for my cheap GTAW welder! General remote knob turner.

3d Printed knob turner - remote TIG amp control!

a cost $1, actually even less, solution for Bluetooth 4.1

<$1 Bluetooth 4.1 Solution

Unique tool and desktop or wind sill trinket to alert when the ISS is overhead.

3D Printed ISS desktop beacon and IFTTT notifier

In this workshop, we'll make 3 different kinds of origami shapes.

Remoticon: Making Glowy Origami

Circuit sculpture using electroforming for organic-ish blinkenlights

circuit sculpture Fail-o-rama

Attiny45 controlled Solarmotors turn small muffin paper cups. The circuit is mounted directly on the wall, with Aluminium and copper tape.

Zeit für Ellerton / Time for Ellerton

1-8 Channel Upgradable Audio Amplifier with TDA2050 or TDA2030 IC DIY HINDI

1-8 Channel Upgradable Audio Amplifier, Utsource

Electroniclovers123

This simple project combines a battery bank with a Bluetooth Low energy beacon for various quality of life improvements

Battery bank with a Bluetooth LE beacon

View all

Bits