0%

0%

Arnab Kumar Das

Maker - Crazy Engineer - YouTuber - Projects on Embedded S/W, Electronics, RC Vehicles, CNC, Mechatronics, DIY Projects

Bangalore, India

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/10/2016.

My Projects

The 2017 Hackaday Prize

Arduino GRBL CoreXY Servo Drawbot is a CNC based drawing robot. It is open source and open hardware.

Crazy Engineer’s Drawing Robot / Arduino Drawbot

Arnab Kumar Das

Crazy Engineer’s PCB Business Card | Electrical / Electronics Engineer’s Printed Circuit Board Business Card

Crazy Engineer’s PCB Business Card

Arnab Kumar Das

My Pages

Jetson Nano Unboxing and Benchmark
06/04/2019 at 17:15 • 0 comments

Full Benchmark Results :: https://www.arnabkumardas.com/platforms/nvidia/nvidia-jetson-nano-review-and-benchmark/
Unboxing and Specification Video ::

Projects I Like & Follow

The 2018 Hackaday Prize

A low cost ESP32 core board with Ethernet and PoE for convenient "single cable" deployments

wESP32: Wired ESP32 with Ethernet and PoE

Patrick Van Oosterwijck

Pi 3 in a metal box? No problem!

Raspberry Pi 3 External Antenna

The 2016 Hackaday Prize

An open-source ultrasound imaging dev kit side project

Murgen: open source ultrasound imaging

kelu124 kelu124

The WiPhone project is an open source mobile IP phone. WiPhone is intended to be hackable, modular, cheap, and open, while remaining usable.

ESP32 WiPhone

The 2018 Hackaday Prize

An open hardware-software framework based on inertial sensors that anyone can use to build a human motion capture system.

Motion Capture system that you can build yourself

Bruno Laurencich

A 252 electromagnet-matrix that controls Ferrofluid

Fetch: A Ferrofluid Display

Applied Procrastination

Bridging the gap between professional and DIY/hobbyist bench power supply

DIY programmable (SCPI) bench power supply

The 2018 Hackaday Prize

A 1 square inch PCB module with 2 tiny solar cells, a highly efficient Li-Ion charger and with 3.3V and 1.8V output

Tiny Solar Energy Module (TSEM)

The 2018 Hackaday Prize

Documentation of the 3rd generation of my ultrasonic phased array project. Levitating stuff, directional speaker, haptic feedback and more!

Open Source Ultrasonic Phased Array

Super-small, ultra-low-power 96 MHz Cortex M4F co-processor manages sensors and processes data allowing the MCU host attend to other things.

MAX32660 Motion Co-Processor

Let's solve this badge! Join this team to share and discuss the DEF CON 26 Badge

DEF CON 26 Official Badge Hacking

A breakout board for the FUSB302, a USB-PD PHY for BMC communication used in USB-C connectors

USB Type-C Power Delivery Breakout

jason Cerundolo

Open source 3D printable DLP 3D printer.

Sunrise - DLP 3D Printer, printable.

The 2018 Hackaday Prize

A tiny, easy to use, hackable, battery-powered, multipurpose wireless repeater

Smallest WiFi repeater / Kortex Xtend Lite /

Amine Mehdi Mansouri

Connect your NavSpark module to Raspberry Pi to get GPS/GLONASS/Beidou access and an on-board Arduino

NavSpark shield for Raspberry Pi

Nibbler

I made all the lights blue. I don't know why.

Blue DEF CON 26 badge

A ride sharing system for scooters

Lend-Rover

Anthony Rasolofonirina

View all

Bits

Jasper Sikken wrote 08/23/2018 at 06:47

Thank you for following my project https://hackaday.io/project/159139-tiny-solar-energy-module-tsem

Are you sure? yes | no

Kris Winer wrote 08/22/2018 at 16:54

Thanks for following my MAX32660 Motion Co-Processor project!

Are you sure? yes | no

Arnab Kumar Das wrote 08/22/2018 at 16:44

Really Awesome project with practical applicability. 12.95 W from PoE is a good power for most nodes and RF devices

Are you sure? yes | no

Patrick Van Oosterwijck wrote 08/22/2018 at 16:38

Thanks for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE project Arnab!

Are you sure? yes | no