0%

0%

Habeel Bakshi

DIY hobbyist who is a mechanical engineer by education

Pune

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/16/2021.

Projects I Like & Follow

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

Wireless packet radio interface for HF/VHF/UHF transceivers, using ESP32 as KISS TNC or audio relay for use with soft modems

ESP32 TNC and Audio Relay for HF/VHF Packet Radio

ryan-kinnett Ryan Kinnett

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

julian-fernandez Julian Fernandez

Hackaday Prize 2019

Based on a large (60mm) linear CCD I want to build a digital back for a medium format camera. A Teensy 3.6 will be used as main electronics.

Digital Scanning Back with Linear CCD

An attempt to wirelessly control an old Hitachi air conditioner

Let me control you: Hitachi air conditioner

florian Florian

Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.

Sigmoid S7P 3D Printer Control Board

80W HiFi Audio Amplifer

Build an Arduino Home Automation System that can control electrical devices like lights, fans, garage doors etc using our mobile phone.

Home Automation Step by Step using Wemos D1 Mini w

jithin-sanal Jithin Sanal

For computer vision learners, drone and robot builders, AR/VR and 360 panorama experimenters. Open-source. Now with WiFi, BT, and more power

StereoPi v2 - CM4-based DIY stereoscopic camera

Hackaday Prize 2020

The New Dexterity Low-Cost Robotic Airship for Education and Research

A Helium-Based, Affordable Robotic Airship

new-dexterity New Dexterity

Add reverb and other effects to a mike input, and have it ready on a speaker output

Sound Processing Shield for Arduino

Buck boost regulator module that supports 3.5V-24V input, charging 1-4 cell batteries, and programmable output from 4.48V to 20.8V

BQ25703A Programmable Regulator Module

alex-klimaj Alex Klimaj

Sometimes simple is better.

A 3D Printed Simple "Walking" Mechanism.

greg-zumwalt Greg Zumwalt

Hackaday Prize 2019

Use the real world as your instrument with our robotic MIDI music machine. Beautiful product design, plug & play UX, fully hackable.

Mini Automat: machines for music

helen-leigh Helen Leigh

The 2017 Hackaday Prize

Control electronic devices with Google Assistant using IFTTT and a Pocket C.H.I.P./Raspberry Pi

Google Assistant DIY Home Control

Introducing the Arduino Lo-Fi Guide to the Orchestra

The Lo-Fi Guide to the Orchestra

Raspberry Pi Computers Ham Radio Hot Spots. D-Star & DMR.

Raspberry Pi Computers Ham Radio Hot Spots.

neil-draeger-kc9mrw Neil Draeger KC9MRW

An Internet Radio receiver based on ESP32 (D1 Mini), a DAC and two 12 LEDs rings showing "real time" audio spectrum by colors.

(Funny) Audio spectrum by colors

View all

Bits