0%

0%

chandler150

doing stuff

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 03/01/2021.

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2016 Hackaday Prize

A Raspberry Pi based Astrophotography System

StarPi

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

hugo-melder Hugo Melder

Extract best practices from existing garage door projects. Build version that suites my needs; eventually integrate into other HA efforts.

Home Automation - Garage Door Opener

Hackaday Prize 2019

LP3D is an (almost) fully lasercut, low component count 3D printer with all linear motion components cut directly into the frame.

LP3D: A fully lasercut kit 3D printer

I was always fascinated by delta robots. So I built one.

Delta robot "deltaR"

malte-ahlers Malte Ahlers

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

alex-rich Alex Rich

Official Hackaday Prize Entry

Home automation system with video surveillance that indicates state by tweet.

Home automation system with Twitter

The 2016 Hackaday Prize

Using the Arduino Uno, a DC motor controller, a DC motor power supplies, and sensors, I have made my chicken coop automated.

Chicken Coop Automation

Supplyframe DesignLab: 2022 Hackada…

Run Xiaomi Thermometer LYWSD03MMC with a supercapacitor and mini solarpanel.

Solar powered Bluetooth Thermometer with Supercap

martmet MartMet

Hackaday Prize 2019

Grasp is a robotic hand designed to to be assembled by a non experienced user and can be useful for different applications.

Grasp Bionic Hand

xavi-cano Xavi Cano

This is the second version of a device I designed to alert me in the unfortunate event the nozzle clogs. It communicates with the printer!

3D Printer Clog Detector V2

elite-worm Elite Worm

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

Building OnStep with Kicad (with all necessary footprints and 3d image files).

My OnStep Kicad Project

michael-otoole Michael O'Toole

Hackaday Prize 2020

You can easily control light, fan, and other home appliances with the voice command.

Alexa Home Automation System Using NodeMCU & Relay

I got a Prusa MK3s printer kit, assembled it, and it worked the first time.

Prusa MK3s Build - my first 3D printing experiance

patrick Patrick

Real-time data visualization software

Data dashboard

Bits