0%

0%

Graham Cole

Maker with a passion for electronics and retro gaming

United Kingdom

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/14/2021.

My Projects

An Intel 8080 emulator running on Parallax Propeller P2 hardware designed to emulate retro arcade hardware

Propeller P2 Retro Games Project

Projects I Like & Follow

A last gasp Uninterruptible Power Supply for any Raspberry Pi computer.

Single SuperCapacitor UPS for Raspberry Pi

bud-bennett Bud Bennett

Hackaday Prize 2019

bringing additive manufacturing to the next level

prism laser scanner

Make your own Raspberry Pi portable arcade console with RetroPie and custom buttons.

Raspberry Pi Portable Arcade Console

hacker-house Hacker House

A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp

Pick and place machine - Smoothieboard/OpenPnp

The 2017 Hackaday Prize

3D printable, Open Source Hardware, tripod kinematics, cable driven 3D printer

Arcus-3D-C1 - Cable 3D printer

daren-schwenke Daren Schwenke

The 2017 Hackaday Prize

A DIY polishing station to smoothen 3d-printed parts built using Arduino and portable humidifier.

DIY Polishing Station for 3d-printed Parts

Experimental case testing 3D printed "waterproofing" and water resistance.

Water Resistant 3D Printed Enclosures

Use of solar panel and supercapacitor to enable an 3.3V 8MHz ATMega386P to function as remote IoT solution using LoRaWAN.

Solar & supercap charged LoRaWAN IoT device

The 2018 Hackaday Prize

Using an esp8266, arduino nano, a salvaged usb power supply, and a couple relays you can automate anything

Home automation on the cheap

Build an Arduino Home Automation System that can control electrical devices like lights, fans, garage doors etc using our mobile phone.

Home Automation Step by Step using Wemos D1 Mini w

jithin-sanal Jithin Sanal

A sleeker case for the bulky BMW proximity key fob.

3D print a thinner car key

My experience designing and making a building DIY 3D printer

DIY Silent 3D Printer

luke-brandon Luke Brandon

I will test the usability of the RF Explorer 3G+ IoT module from seeedstudio

Basic spectrum analyser with RF Explorer 3G+ IoT

dorijan Dorijan

Convert Kicad PCB files into GCode with isolated PCB Nets

PCB Isolation Routing Software

michael-schembri Michael Schembri

How to generate frequencies below 10Hz using a PC, an amplifier, and a handful of components.

Extreme Low Frequency Signal Generator

joseph-eoff Joseph Eoff

An Open Source TOTP based hardware authenticator using ESP32.

Open Authenticator

vedant-paranjape Vedant Paranjape

The 2018 Hackaday Prize

Early computer designers were cheap masochists. This front panel is much better yet could have been made 50 years ago !

Hardware assembler / EMUI

yann-guidon-ygdes Yann Guidon / YGDES

A raspberry pi camera running on batteries, which takes photos, HDRs, panoramas, timelapses and more.

Yet another raspberry picam

View all

Bits