0%

0%

Conrad Brindle

Aerospace Engineering Undergrad. I like all things drones and 3d printing

Bristol

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Youtube

This user joined on 04/28/2020.

My Projects

Used as a base for assemblies, just put in your parameters and export the STL

Parametric 3D Printed Cylindrical Coupling

Projects I Like & Follow

Hackaday Prize 2019

This wind-up car gift card is fully 3D-printable and is the ideal present for your friends and family.

Fully 3D-printable wind-up car gift card

Hackaday Prize 2019

ESP8266, 80/160Mhz, 4/8Mb, WiFi, LCD 128х128, RGBled, HQspeaker, 8 buttons, 600mAh battery, 30x70х15mm

ESPboy: retro games, IoT, STEM for education & fun

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

Julian Fernandez

The 2018 Hackaday Prize

This open-source, low-power LTE shield uses cutting-edge CAT-M technology and also integrates GNSS location capabilities!

LTE CAT-M1/NB-IoT Shield for Arduino

An open source Pellet Extruder for large format 3D Printing

Pellet Extruder

Hackaday Prize 2019

URU Key - a biometric FIDO2 Authenticator built with ESP32 / ATECC508A / FPC1020

URU Key

Andrey Ovcharov

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

The 2018 Hackaday Prize

A low-cost STM32 board with motor controllers created along with visual programming and control software for use in education.

Visual Robotics Platform

Driving controller-less graphics LCD with Arduino

Arduino CLGLCD

The 2018 Hackaday Prize

The Fluxamasynth is a module that makes it easy to add high quality MIDI sound to any Arduino or Raspberry Pi project.

Fluxamasynth Modules

Raspberry Pi + Camera Module + Dynamixel AX-12A Servos

Raspberry Pi Robot Arm With Computer Vision

The 2018 Hackaday Prize

UNMANNED GROUND VEHICLE, Compatible with Arduino

M1 Rover

Sound in, sound out. Now both on one FeatherWing.

SoundWing Audio I/O Board

Comparatively huge heat sink for Raspberry Pi sourced from old PC case

Raspberry Pi Heat Sink Recycled from PC

LoRa 2.4Ghz module used in full duplex mode, sending/receiving MavLink telemetry data

LoRa 2.4 Ghz for drone telemetry

By combining 3d parts, gyro, and a stepper, I made a programmable foot pedal for my cheap GTAW welder! General remote knob turner.

3d Printed knob turner - remote TIG amp control!

A hacked IKEA FREKVENS LED cube with an Onion Omega inside, running JavaScript to render lights

FREKVENS FJÄRRKONTROLL

View all

Bits