0%

0%

David Smith

Started in electronics as a hobby in 1975 and then computers in 1977. Just starting to get back into electronics again

Oregon

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/25/2018.

Projects I Like & Follow

Collecting snippets that can quickly be copied to assemble a program for different sensors etc. Mostly about ESP8266/32 with Arduino IDE.

ESP cookbook

turo-heikkinen Turo Heikkinen

The 2018 Hackaday Prize

USB hid keyboard ... etc. for Raspberry PI

mini (Pi)QWERTY USB keyboard

A 1" by 1" 20msps Oscilloscope based on the PIC32MZ

1 Square Inch 20msps Oscilloscope

mark-omo Mark Omo

The 2017 Hackaday Prize

My goal is a 4-bit CPU using recycled cardboard substrate and Diode Transistor Logic. This is an educational platform for me.

The Cardboard Computer - IO is my name

dr-cockroach Dr. Cockroach

The 2018 Hackaday Prize

Chapter 1 : Raspberry Pi Zero W Stepper Motor Module Balancing Robot and 3d Printer - CNC Machine

Raspberry PI Module for Robotics Mythololgy (1)

reginald-sourn Reginald Sourn

The 2018 Hackaday Prize

The ESP8266 based multi-client lighting gadget

Mc Lighting

tobias-blum Tobias Blum

A single-ended tube stereo amplifier with a modern technology twist

Keritech "Little Red Devil" Single-Ended EL84 Amp

keri-szafir Keri Szafir

Incredible integration of Si4720 enables very simple and stable FM transceiver by single chip!

An exotic FM transceiver using Si4720

ESP32 Home automation controller with HMI interface

Smarthome ESP32 HMI interface

ALL-IN-ONE Irrigation and monitoring system for Smart Homes

Droplet Smart Irrigation System

The 2018 Hackaday Prize

A MINIATURE VERSION OF A REAL SNOWPLOW CONTROLLED VIA PLAYSTATION WIRELESS CONTROLLER OR SMARTPHONE.

SnowPlow Robot

vittorio-loschiavo Vittorio Loschiavo

Using a fully 3d-printed two-axis rotational stage, an arduino and a camera to produce accurate 3D Models

High Quality 3D Scanner (<100€)

The 2018 Hackaday Prize

A 45$ open source oscilloscope built on Orange Pi Zero. You can make oscillograms, upload it to cloud service, make diffs and share them.

Cloud Oscilloscope

mikhail-dronov Mikhail Dronov

The 2017 Hackaday Prize

Educators can use Raspberry Pi, Arduino, & science toys to teach STEAM (science, Technology, Engineering, Art, Math)

Raspberry Pi, Arduino, & Science Toys Teach STEAM

steve-schuler Steve Schuler

Something to make your life easier on the bed, when you have to switch off your tv and any other light in the house :-)

IR and NRF remote based on arduino

Convert Burk Radio Remote Control from 4 Wire control to Ethernet using Comtrol adapters

Reviving a 4 wire communication system

I built a reflow oven based on the Controleo2 with added hardware.

Controleo2 Based Reflow Oven

mark-goldberg Mark Goldberg

A FX loop switcher, featuring 8 x 6.5mm jack send-returns. SPDT Reed relays and 2 x AVR microcontrollers, communicating through an XLR-cable

8ch Loop Switcher with remote control

View all

Bits

Dr. Cockroach wrote 03/25/2018 at 07:18

Good morning David and thank you for following my Cardboard Computer adventure.

Welcome to Hackaday.io :-)

Are you sure? yes | no