0%

0%

Didier Lacroix

Deep Learning make Senses

Santa Clara, CA (USA)

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

twitter

This user joined on 01/01/2015.

Projects I Like & Follow

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

The 2018 Hackaday Prize

A low cost ESP32 core board with Ethernet and PoE for convenient "single cable" deployments

wESP32: Wired ESP32 with Ethernet and PoE

patrick-van-oosterwijck Patrick Van Oosterwijck

The 2018 Hackaday Prize

Affordable and open-source LiDAR based on 3x VL53L0X ranging sensor

xLiDAR

Hackaday Prize 2019

Modular Open Source Hardware Tablet that is easy to hack and can run a standard Desktop Linux Distribution (or Android)

DLT one - A Damn Linux Tablet!

Get the most out of your (heltec/ttgo/aliexpress) ESP32 LoRa OLED development board

ESP32 - LoRa - OLED Module

The 2018 Hackaday Prize

AMS's new AS7265X 3-chip set promises a compact, 18-channel, 20 nm FWMH spectrometer for less than $25

Compact, $25 spectrometer

kris-winer Kris Winer

Getting in touch with the WiFi LoRa 32 Board from HelTec Automation

ESP32 Board - WiFi LoRa 32

Follow this project to learn how to use FPGAs and incorporate them into your projects.

The Hobbyists Guide to FPGAs

luke-valenty Luke Valenty

The 2018 Hackaday Prize

A tiny, low-cost, and scalable device for sub-millimetric 3D positioning.

HiveTracker

The 2018 Hackaday Prize

Useful STM32L082-based devices with embedded LoRa radio modem programmable with the Arduino IDE via USB connector, i.e, hackable.

Hackable CMWX1ZZABZ (LoRa) Devices

kris-winer Kris Winer

The 2017 Hackaday Prize

Low-cost, open-source FPGA boards in a tiny form factor with built-in USB, SPI flash, LDO, and MEMS clock.

TinyFPGA B-Series

luke-valenty Luke Valenty

The 2018 Hackaday Prize

Unhappy with the ESP32-WROOM module, I designed an ESP32 D2WD module to ease custom board assembly and enable small, wearable ESP32 devices

Small ESP32 Module for Easier Custom Design

kris-winer Kris Winer

Super-small, ultra-low-power 96 MHz Cortex M4F co-processor manages sensors and processes data allowing the MCU host attend to other things.

MAX32660 Motion Co-Processor

kris-winer Kris Winer

How to deploy the SDK for the K210 Dock.

Kendryte K210 Development Tutorial for Windows 10

The 2017 Hackaday Prize

A dirt cheap open hardware USB-JTAG board designed to program TinyFPGA A1 and A2 boards.

TinyFPGA Programmer

luke-valenty Luke Valenty

Tiny board with a BIG FPGA. SD card, 64mbit DDR RAM, ECP5 FPGA, 64mbit flash, and micro USB. Do more with up to 45k LUTs.

TinyFPGA E-Series

luke-valenty Luke Valenty

STM32L433-based board with CAM M8Q concurrent GNSS, EM7180+MPU9250+MS5637 for absolute orientation, and an ESP8285 for wifi connectivity.

Asset Tracker

kris-winer Kris Winer

The 2018 Hackaday Prize

fRISCy combines SiFive's new RISC-V microcontroller with a Lattice iCE40 FPGA for a platform that is all open source!

fRISCy: FPGA + RISC-V Digital Processing Board

stephen-newberry Stephen Newberry

View all

Bits

Patrick Van Oosterwijck wrote 09/13/2018 at 15:54

Thanks for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE project Didier!

Are you sure? yes | no

Kris Winer wrote 08/24/2018 at 20:06

And thanks for following my MAX32660 Motion Co-Processor project!too!

Are you sure? yes | no

Kris Winer wrote 08/24/2018 at 00:18

And thanks for following my Asset Tracker project too!

Are you sure? yes | no

Kris Winer wrote 08/20/2018 at 01:28

Thanks for following my Hackable CMWX1ZZABZ (LoRa) Devices project!

Are you sure? yes | no