0%

0%

Jeremy Reeve

Hacker.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 04/27/2015.

Projects I Like & Follow

Cartesian PNP machine using Rails/Carriages for high speed and accurate part placement. Affordable open source pick and place is on the way.

DIY Pick and Place

The 2016 Hackaday Prize

TCD1304-based linear CCD module driven by a Nucleo F401RE or an STM32F103 blue pill

Linear CCD module

The 2016 Hackaday Prize

Capture interactive models of magnetic fields with your 3D printer

3D Magnetic Field Scanner

The 2016 Hackaday Prize

This project is to build a motorized gimbal mount to convert a laser distance module into a 3d LIDAR.

Open LIDAR

The 2016 Hackaday Prize

Bringing industrial automation and regulation to everyone.

Mycodo - Environmental Regulation System

The 2016 Hackaday Prize

Network Analyzer on an Arduino Shield which covers from 0-72MHz.

Arduino Network Analyzer

The 2018 Hackaday Prize

Itsy-chipsy is a chip platform that enables a multi-block service like-oshpark capable to offer area for your own chip, for as low as $100.

Itsy-Chipsy: Make your own $100 chip

You read that right.

Open Source Freakin' Scanning Electron Microscope

A GPS derived 10MHz frequency reference source for my lab

GPS locked 10MHz lab frequency reference

The 2017 Hackaday Prize

Low-cost, open-source FPGA boards in a tiny form factor.

TinyFPGA A-Series

open hardware 2 GHz to 13 GHz two-port vector network analyzer

Vector Network Analyzer

The 2016 Hackaday Prize

Analyze LEDs and LDs to create electrical (SPICE) and optical models.

Automated LED/Laser Diode Analysis and Modeling

The 2016 Hackaday Prize

Use your lasercutter to make an optics bench.

Lasercut Optics Bench

The 2017 Hackaday Prize

Sub 1GHZ RF wireless modules operating at 915MHZ and 433MHZ ISM bands, based on the ADF7023, full open source!

S1G RF: Sub 1GHZ Radio Modules 915MHZ and 433MHZ

The 2017 Hackaday Prize

A complete LiFePO4 based solar power supply for IoT devices

LiFePO4wered/Solar1

Patrick Van Oosterwijck

The 2017 Hackaday Prize

A 3D model that can be sliced through a process called 'nesting', sent to a CNC Machine and constructed like a 3D Jigsaw puzzle.

TinyHackerHouse

The 2016 Hackaday Prize

A small, simple, low-cost, versatile PCB that can be used to make filters, attenuators, amps, dummy-loads the DIY-way

RF Biscuit

The 2016 Hackaday Prize

The idea for this project is to create an open source modular test system. Inspired by the PXI system but not costing thousands of dollars.

Open Source Modular Test Bench

View all

Bits

Patrick Van Oosterwijck wrote 04/27/2017 at 15:24

Thank you for following and liking my #LiFePO4wered/Solar1 project!

Are you sure? yes | no

AVR wrote 12/19/2016 at 23:15

Thanks for the follow and skull on the S1G-RF project, just posted a new log detailing firmware!!!!

Are you sure? yes | no

anthony.webb wrote 01/31/2016 at 05:06

Thanks for following my PNP project! Feedback is welcomed and appreciated!

Are you sure? yes | no