0%

0%

Brett Killion

I'm an electrical engineer who loves building test kit and RF related projects!

Wauwatosa, Wisconsin

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/05/2016.

My Projects

The 2016 Hackaday Prize

Network Analyzer on an Arduino Shield which covers from 0-72MHz.

Arduino Network Analyzer

The 2017 Hackaday Prize

GPSDTx is a board capable of transmitting a signal up to a few MHz (1-3?) wide anywhere between 100MHz and 2.2GHz

General Purpose Software Defined Transmitter

The 2016 Hackaday Prize

The idea for this project is to create an open source modular test system. Inspired by the PXI system but not costing thousands of dollars.

Open Source Modular Test Bench

Projects I Like & Follow

The 2015 Hackaday Prize

A printable robot arm, a little bigger than the usual hobby servo once.

3D Printable Robot Arm

andreas-hoelldorfer Andreas Hoelldorfer

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Official Hackaday Prize Entry

High Altitude Balloon payload capable of streaming live pictures, gps coordinates, and data telemetry.

CUBEX

The 2015 Hackaday Prize

Custom designed breadboard computer (BBC!) with bespoke programming language, full graphics, sound and SD card storage.

65c02 Homebrew Computer on breadboard

Programming an Arduino wirelessly within the Arduino IDE using the ESP8266 as a transparent serial device

Wireless Arduino uploading using ESP8266

mishel-george Mishel George

Arduino, mqtt, web socket, building blocks for home automation. Control led manually and remotely from a webpage and retrieve sensor info

Arduino, mqtt, web socket, home automation

liviubogdanioan

The 2015 Hackaday Prize

Take a cigarette lighter, an AVR microcontroller (ATtiny13), and an IR LED. Wire all together. Now, you can remotely control your Nikon camera.

Turn a cigarette lighter into an IR Nikon remote

My attempt to revive a research/industrial robotic arm.

THE ROBOT PROJECT

Official Hackaday Prize Entry

A translucent wall with custom shelves, a waterfall feature, and remotely-controllable lighting

Waterfall Wall with LED Illumination

Official Hackaday Prize Entry

Stop wasting time and money on expensive coaxial cable and put the whole radio right at the antenna feedpoint!

Ethernet to Radio Adapter

The 2015 Hackaday Prize

Solar powered Bluetooth Low Energy Tracker with beeper and LED to assist in locating it.

Sol BLE Tracker

This headset uses transcrainial alternating current stimulation to induce lucid dreaming in wearers!

Lucid Dreaming Device (tACS)

tyler-sisk Tyler Sisk

Playing Quake on the Internet of Things...

A VGA Display for the Intel Edison!

Hackaday Prize 2019

Chaos Illustrated by the Analog Computation of the Lorenz Equations

Chaos Computer

tom-quartararo Tom Quartararo

one does not simply order 50 ws2812b LEDs and has a 3D printer at home

RGB 16 Segment LED

Make your kindle interacts with your home automation

Kindle as a home automation controller/sensor

A hand-solderable SMD/TH module w/ RP2040 MCU+8MB FLASH, LDO, LiPo charger, reset btn, and Neopixel. Breaks out all GPIO+USB+SWD+BOOTSEL+RST

RP2040 Stamp

I'm building a clock using IN-14 Nixie tubes [WIP]

Nixie clock

View all

Bits