0%

0%

lotekmachine

I brake things. on boats

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/10/2016.

Projects I Like & Follow

It can power the Raspberry Pi Zero over Ethernet. The board also adds an Ethernet Phy to the Raspberry Pi Zero to give you full Ethernet

PoEPi: Pi Zero Power over Ethernet with PHY

bluetooth app controlled professional portable DSP mixer.balanced audio IO,phantom power,flexible routing,ISO recording. timcode. AVB audio.

Multichannel Audio DSP Field Mixer Recorder

ben-biles ben biles

Charlieplexed LEDs 3D-soldered together to make blinky platonic solids!

LED Polyhedron

Mini (1.44'' x 0.94'' or 24mm x 37mm) 8X16 RGB LED Array. 128 RGB LEDs with three LED chip each gives 384.

384:LED

DIY micro SD Card: fits all standard micro SD Sockets.

DIY micro SD Card

antti-lukats Antti Lukats

The 2017 Hackaday Prize

Basic interpreter for the ESP8266 wifi SOC

ESP8266Basic "A basic interpret for your esp"

Planar stabilization on X-Y Axis w/ 2 servos controlled by Arduino Nano and a 6 DOF MPU6050 IMU

2-Axis Stabilization w/ 6DOF MPU6050 and Arduino

fullyanalog-programmer

The 2016 Hackaday Prize

glowy cubes (ws2812b) made from frosted acrylic with web service to easily find it on your network.

rgbcubes - iot finder

christian-stveken Christian Stöveken

The 2017 Hackaday Prize

This card has not-protected NFC tags, that can be programmed to do actions, or save data. They can also be protected with a password.

NFC Card

sagi-harush Sagi Harush

IR Receiver or Demodulator module made using photo-transistor BPW 77NB and standard NPN amplifier transistor PN2222A working on Arduino Due

Custom IR Remote demodulator for Arduino Due

HID USB relay based on ATTINY45 with optoisolated inputs

USB relay for Raspberry Pi, Windows ...

Join this project to talk about robots!

Robotics Chat

dehipu deʃhipu

It has a weaponized mode

40,000 Lumen LED flashlight

eddie-anderson Eddie Anderson

My first nixie clock w/ IN-14 and a dekatron with a temporary mounting

Just another Nixie Clock

fullyanalog-programmer

LED matrix in a IKEA Ribba picture frame

RibbaLED

Developing wearable gear for hazardous gas detection using PIC preprocessing and modular sensors kits

IoT, PIC G.as A.ir S.niffer

I have created a nice fit 3D case that's is printable and includes buttons and on/off switch for Kevin Bates Arduboy Dev Kit.

Ardubot 3D Printable Case

make electronic music using solar flare, earth or space radio waves, meteor echoes sound or even the sound of hydrogen.

psicoff

chris-quites C̐ͪhris Q҉͚͙uites

View all

Bits