0%

0%

markwtech

I am an electrical engineer and I enjoy building robots, making music, and hacking and building all kinds of neat things.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

My Website

This user joined on 06/23/2017.

My Projects

A vintage bus display becomes a clock

Flip Dot Clock

Projects I Like & Follow

The 2018 Hackaday Prize

A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.

3D Printed Robot Actuator

Notes from hacking around with a $100USD WiFi enabled QuadCopter.

Reverse Engineering a ProMark VR Toy Drone

The 2016 Hackaday Prize

A DIY 3D printer (big volume, inexpensive, lightweight and portable).

RigTig's Big 3D Printer

With this project I want to show you how you can make Schlieren-Videography at home. To do so we will use the Moiré-effect.

Schlieren-Videography

The 2016 Hackaday Prize

Autonomous intelligent IOT nodes connected to the home network, controlled via simple IFTTT style rules, configured via web interface

WiFi Based Distributed IOT Home Automation

Mini (1.44'' x 0.94'' or 24mm x 37mm) 8X16 RGB LED Array. 128 RGB LEDs with three LED chip each gives 384.

384:LED

The 2017 Hackaday Prize

Internet enabled (IOT) weather station using the GPRS network

Arduino GPRS IOT Weather Station

Capt. Flatus O'Flaherty

The 2016 Hackaday Prize

1btn is a powerful, open source, do-it-all button for the Internet...

1btn: Open Source WiFi connected IoT Button

A 7 segment display Arduino clock with RTC, alarm and brightness control.

Yet Another Arduino Clock

open source data logger for the Raspberry PI

open source data logger RPI

An autonomous rover that follows GPS points and also has a First Person View system on board.

Autonomous Rover

Gerardo Gerardo

HD Video from a microcomputer via a Headphone Jack

Component Video Adapter

William William

A wearable LED device with show controllable system

Firefly

Raspberry Pi Zero W based IoT Smart Switch platform. Control Philips Hue lights with ease!

hueBerry: IoT Smart Switch!

The 2017 Hackaday Prize

Combines Machine Learning and Embedded Systems

Energy Saving IoT Device for a Smart Home

Raspberry Pi and Arduino sensor interface.

B3SI - Space balloon/Robot Sensor Interface

Build like a Rockstar! Software continuous integration build status on a guitar fretboard. Updated for Circle CI compatibility

The FretBoard

I made this for a visually impaired student in music tech at ASU. She needed haptic feedback whenever an audio channel peaked.

haptic audio thinger

matthew sherwood

View all

Bits