0%

0%

Benjamin Isaiah

Low level electronics tech full of curiosity and adhd

Nebraska

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter

This user joined on 02/25/2020.

Projects I Like & Follow

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

Julian Fernandez

Hackaday Prize 2019

MIDI electronic portable practice hurdy-gurdy: It's always in tune.

The Digi-Gurdy

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

Benjamin Prescher

Hackaday Prize 2019

This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32

Electric Bobby-Car

Too simple for a project page & which may never happen.

Silly hardware wishlist

lion mclionhead

A 16x7-Segment LED Clock that syncs time from GPS satellites.

gps_clock

Design and build of a small, portable, Bluetooth-enabled boombox

Bluetooth Boombox MkII

LoRa 2.4Ghz module used in full duplex mode, sending/receiving MavLink telemetry data

LoRa 2.4 Ghz for drone telemetry

The 2018 Hackaday Prize

Octopod, a uniquely shaped full automation system that allows you to monitor your home and keep security with AI and smart RFID locks.

Octopod: Smart IOT Home Automation Project

sakshambhutani2001

TIRO (Time is Running Out) is a watch that vibrates every few minutes to remind the user that time in this world is quickly running out.

TIRO Vibrating Watch

AccidentalRebel

A collection of wirelessly connected color changing costume pieces, controlled by a 'magic' color sensing wand.

Color Stealing Fairy

Underwater drone i-GOR + Float station

UNDERWATER DRONE i-GOR

Roman Weitendorf

Hackaday Prize 2019

It is a portable music player with light, works based on ATtiny85 micro-controller which plays songs from SD card.

Pocket BOOMbox

Discrete Electronics Guy

Experiments with polyphonic pythonic tone playing

Adventures in Bleep Bloops with CircuitPython

Everyone need an heated chamber, to be able to 3D print some difficult plastics from time to time. Here is a definitly simple solution.

Zatsit's Ultra Simple Heated Chamber

ESP32 board with a buzzer generate CW (Morse) signal User interface is implemented with an android App connected to ESP32 using Bluetooth LE

ESP32-CW

Hackaday Prize 2019

Most electromagnetic technologies can be adapted to work with gravitational fields: Sensors, Transmitters, Generators, Power Sources.

Gravitational Engineering and Sensor Arrays

How To Make Smart Home Automation Using Arduino

Home Automation Using Arduino, Utsource view

Electroniclovers123

View all

Bits