0%

0%

omaralrafei.95

I am a mechatronics engineer and am a robotics enthusiast.

egypt

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/27/2020.

My Projects

It's a 5DOF robotic arm that is almost like kuka KR3 R540 robot arm.

K1 OSIRS R429(Robot arm)

Things I've Built

4 DOF scara robot arm

it's a robotic arm that assembles smd pcbs using two separate operated heads each of which has a distinct function one for pick and place and one for solder dispensing.

Projects I Like & Follow

Interfacing 3.5" HD 1.44 MB Floppy drive through FDD connector with Arduino UNO

Arduino raw data 3.5" Floppy reader

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

Step-by-step instruction to run Wine on Raspberry Pi (or other ARM) using ExaGear Desktop

Run Wine on Raspberry Pi

The 2017 Hackaday Prize

Neopixel watch with accelerometer.

Arduino Neopixel Watch

Marcello Graves

An Arduino controlled infinity mirror mask. You can even see while wearing it!

Infinity Mirror Scuba Mask

This Gopro hack allows wired control for robotics applications, using any microcontroller, without break or damage the buttons

Gopro Hero 4 wired control

The 2016 Hackaday Prize

Using the Arduino Uno, a DC motor controller, a DC motor power supplies, and sensors, I have made my chicken coop automated.

Chicken Coop Automation

Yet another IR-blaster, but this time with CEC (and WIFI)

IR-blaster with CEC

This boombox sounds pretty loud. 2x50 W speakers running on DIY 18650 Li-Ion battery pack salvaged from old laptop batteries. In a wine box.

100 W portable bluetooth speaker

2x3/2x5 IDC 2.54mm, 2x3 Pogo pin 1.27/2.54mm

AVR-ISP Pogo Pin Adapters

Oled 20x2 text screen with bluetooth BLE.

Phone bluetooth notifier

Comparatively huge heat sink for Raspberry Pi sourced from old PC case

Raspberry Pi Heat Sink Recycled from PC

Zakhar is a robotics UX project. The main aim is to decrease the anxiety of users interacting with a robot.

Zakhar the Robot

Andrei Gramakov

In this project I reverse engineer the interface between my car stereo and CD changer with the goal to replace it by my own Bluetooth PCB

Bluetooth CD Changer Emulator

Hackaday Prize 2019

The intent behind the Ultra Servo is to give a maker or a robotics a powerful building block.

Ultra Servo V2.0

A Versatile AVR-based Data Recorder

A Versatile AVR-based Data Recorder

An uninterruptible power supply for Raspberry Pi that can provide more than an hour of backup power and shutdown the Pi safely.

Power PI: A Smart UPS for the Raspberry Pi

In this tutorial, I am going to show you step by step How to make a “Smart Home Automation Control System using NodeMcu ESP8266"

Home Automation Control System NodeMcu ESP8266

View all

Bits