0%

0%

permblackshark

like diy electronics

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/10/2016.

Projects I Like & Follow

A SCPI programmable precision resistor

Programmable Precision Resistor

Supplyframe DesignLab: 2023 Hackada…

Raspberry pi based open source device with SDR and easy to use controls for exploring RF signals and data.

SDR dock 1.0

kaushlesh-c-kd9vfu Kaushlesh C. ( KD9VFU )

DIY power supply made from an ATX. Three fixed voltage outputs and a variable one with a Power Meter. All packed in a mini festool systainer

Bench Lab Power Supply from ATX

urs-schmidt Urs Schmidt

Supplyframe DesignLab: 2023 Hackada…

An open hardware reading device that's easy to build, easy to manufacture, and easy to make your own.

The Open Book

joey-castillo joey castillo

Supplyframe DesignLab: 2023 Hackada…

This project allows the user to effortlessly bond wires while only utilizing one hand for both the solder and soldering iron.

Solder Sustainer | Effortless One-Hand Soldering

Supplyframe DesignLab: 2023 Hackada…

Open source experiment kit made with the AS7262 (six colors) and AS7263 (near infrared) spectral sensors and the Raspberry Pi

Homemade Spectrometer

guillermo-perez-guillen Guillermo Perez Guillen

A 10 inch width HiFi music player with 7.84 touchscreen base on Raspberry Pi

Raspberry Pi 10inch player

rextang Rex.Tang

Supplyframe DesignLab: 2023 Hackada…

This tool can project UV mask and cure paint on various objects, including PCB prototypes, 3D prints, panels and household items

UV projection printer for PCBs and item marking

Wojciech "adalbert" J

Documenting my efforts to use up the various electronics bits and pieces I've collected over the years.

Use It Up!

dan-julio Dan Julio

DIY $8 Mechanical Numpad (with Arduino Compatible Firmware!) and how I optimize it for international shipping

DIY $8 Mechanical Numpad

Morse Communication Device

Morse Communication Device (Mo-Bus2)

The project uses the Makerfabs-ESP32-S3-SPI-TFT-with-Touch board to produce a Touch-Deck

TFT Touch Keypad (3x5)

michael-otoole Michael O'Toole

Home Media Center powered by Orange Pi

Orange Pi Home Media Center

andriymalyshenko andriy.malyshenko

My father has this fileserver that is not connected to a monitor, so I decided to put a small LCD display to display useful info

LCD display for a HP G7 Microserver

abraham-limpo Abraham Limpo

This project was intended to combine the very old with the very new. It is both a functional art display, as well as a Bluetooth speaker.

Magic Eye Vacuum Tube Display Bluetooth Speaker

jay-riedl Jay Riedl

VFD displays are known for their high brightness, high contrast, and wide viewing angle.

Retro look Analog style VU meter on VFD display

mircemk mircemk

WiFi repeaters are getting super cheap now ($5!) and can contain quite open hardware. Try to make the most out of the QCA953X based ones.

Fun with wifi repeaters

Open Source Power Quality and Energy Analyzer

PQopen

michael Michael

View all

Bits

Enki wrote 06/30/2021 at 15:24

Thanks for following my project https://hackaday.io/project/180506-li-ion-charger-automation !

Are you sure? yes | no

Brian Cornell wrote 12/19/2020 at 20:35

Thanks for following https://hackaday.io/project/175860-lm5161-based-dc-dc-bias-ps

Are you sure? yes | no

nagup wrote 11/15/2020 at 19:51

Thanks for following :)

Are you sure? yes | no

daovanhoa12 wrote 08/19/2020 at 03:06

Thank you for following

Are you sure? yes | no

Pete Restall wrote 06/25/2020 at 08:31

Awesome ! Thanks for following https://hackaday.io/project/173339-usb-type-c-pic32-breakout-and-development-board They should be available on Tindie in the next couple of weeks when my batch arrives, but everything's on GitHub if you want to poke around. Happy to answer any questions. I also have a 'Lite' version that I'm prototyping at the moment, which I'll hopefully be in a position to share soon...

Are you sure? yes | no

Brian Cornell wrote 06/20/2020 at 23:48

Thanks for following https://hackaday.io/project/173262-usbcon.

Are you sure? yes | no

dannyvandenheuvel wrote 06/14/2020 at 08:10

Thanks for following #3D printer Interface

Are you sure? yes | no

Mark Wilson wrote 06/08/2020 at 04:09

Thanks for following!

Are you sure? yes | no

Stefan Wagner wrote 05/29/2020 at 11:47

Thank you for following my project USB Power Tester !

Are you sure? yes | no

Anthrobotics wrote 05/14/2020 at 04:09

Thanks for following our project!

Are you sure? yes | no

bob wrote 04/12/2020 at 11:32

Thanks for following my experimental sheet metal bender.

Are you sure? yes | no

MaBe42 wrote 12/30/2019 at 07:12

Thanks for following!

Are you sure? yes | no

braincodec wrote 10/09/2019 at 19:59

Thank you for following!

Are you sure? yes | no

euchcat wrote 10/09/2019 at 18:46

Thank you for following ! :)

Are you sure? yes | no

mark wrote 09/11/2019 at 06:37

Thanks for following #3Dprinter firmware run on raspberryPi

Are you sure? yes | no

Guille wrote 04/15/2019 at 13:16

Thank you for following

Are you sure? yes | no

Mark Dammer MM0DQM wrote 10/28/2018 at 11:18

Thanks for following my project https://hackaday.io/project/162089-magnetic-loop-antennas-for-qrp-amateur-radio

Are you sure? yes | no

SCART VADER wrote 09/07/2018 at 14:24

Thank you for following

Are you sure? yes | no

magnustron wrote 08/28/2018 at 07:29

Thanks for following my https://hackaday.io/project/160734-e-mail-delete-pedal ! Your message gets deleted ;)

Are you sure? yes | no

open-plc-com wrote 08/15/2018 at 04:43

Thanks for follow my project https://hackaday.io/project/160410-nano-pi-in-din-rail-enclosure-box-with-oled-096

Are you sure? yes | no

Next