0%

0%

rcrussel

I am interested in building and designing robotic systems.

Fayetteville

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/23/2023.

My Projects

Project to design high accuracy, 3D printable Robotic Arm with 3D printable planetary gearboxes, and controlled using dynamic model.

3D Printed 6DOF Robotic Arm

Projects I Like & Follow

The 2017 Hackaday Prize

A smartphone controlled balancing robot using bluetooth, stepper motors, homemade electronics and 3D designed / printed parts.

Android Controlled Self Balancing Robot

arcadia-labs Arcadia Labs

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

julian-fernandez Julian Fernandez

he arrival of small satellites that used LoRa for telemetry data has meant that less technically qualified persons, with a very low budget,

Ground station for LoRa satellites

alberto-nunez alberto nunez

Run Stremio on Raspberry Pi with a kiosk look

Install Stremio on Raspberry Pi

Hackaday Prize 2019

Armed with a Nerf blaster. This turret tracks and shoots down micro drones, otherwise know as "Tiny Whoops"

Anti Drone Gun Turret

drew-pilcher Drew Pilcher

Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.

Sigmoid S7P 3D Printer Control Board

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

alex-rich Alex Rich

Hackaday Prize 2019

FiberGrid is a sensor framework for robotics

FiberGrid

Fully 3D Printed 6 DOF Arduino Robot Arm

LittleArm Big

Digital oscilloscope experiment based on Arduino

Digital oscilloscope experiment based on Arduino

The best of model rocket tech powered by Arduino!!

Arduino TVC ModelRocket

nikhil-mishra Nikhil Mishra

Arduino IDE is also available in Mobiles, We can program any MCU using this. This supports over 100 type of MCU boards.

How to Program Arduino and ESP using Mobile device

sagar-001 Sagar 001

Modular, customisable, 3D printed, retro-style case for a home computer

RETRO 1 - Home Computer Console

the-lab-guy The Lab Guy

Setting up RFID on a Raspberry Pi using Microsoft IOT Core.

RFID on Raspberry Pi

Modify your gas furnace thermostat and electric hot water heater controls and save $750+/year

Home Automation with NodeMCU

nodemcu12ecanada

Proof of Technology: Multifunctional handy control cube mith low-cost microelectronics.

Magic Cube

Cheap way to visualize heat images using a thermal camera and an ESP32-C3 board.

ESP32 Thermal Webcame Stream

martijn martijn

Learn how to enhance the control of consumer electronics devices with hand gestures and how to create similar solution by yourself.

Gesture-based remote control device

alexmiller alex.miller

View all

Bits

The Lab Guy wrote 01/22/2024 at 18:31

Thank you for your interest in my RETRO 1 - Home Computer Console project.

Are you sure? yes | no