Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Carolina day likes and follows

1.8k
1.3k
28
20 autonomous battery-powered bright LEDs, TouchOSC interface, generative art, Artnet(DMX)/OpenSoundControl support
Project Owner Contributor

Radio LED controller

Alexander UrbanovichAlexander Urbanovich

924
924
2
Arduino based high voltage parallel programmer for AVR microcontrollers
Project Owner Contributor

AVR High Voltage Programmer 2

Dilshan JayakodyDilshan Jayakody

1.6k
740
13
Fuse and splitter boards that use Anderson PowerPole 45-amp connectors.
Project Owner Contributor

Anderson Power Distribution

Adam DemuriAdam Demuri

7.7k
494
47
Low cost ventilator for standalone use during the Covid-19 pandemic
Project Owner Contributor

Low Cost Ventilator

Erik WachlinErik Wachlin

16.1k
130
104
Roller cam based portable BVM ventilator.
Project Owner Contributor

COSV - Cam Open Source Ventilator

Daren SchwenkeDaren Schwenke

4.9k
59
51
A simple network-attached OLED display for showing...whatever.
Project Owner Contributor

ESP8266 Network Display

Tom NardiTom Nardi

4.8k
58
41
Bidirectional flow (volume), pressure, and temperature sensing in a single inexpensive I2C/SPI package.
Project Owner Contributor

VISP - Ventilator Inline Sensor Package

Daren SchwenkeDaren Schwenke

4k
32
35
A differential screw is used to make a finely adjustable Z=0 endstop for a 3D printer.
Project Owner Contributor

Differential Screw Z-Axis Optical Endstop

Mark RehorstMark Rehorst

1k
27
15
Can you come up with a low-cost, easy-to-build ventilator for hospitals in need?
Project Owner Contributor

Develop Ventilators to treat COVID-19 patients

EnnomotiveEnnomotive

2.1k
25
15
An easy to build a low-cost PPE hood
Project Owner Contributor

Coronavirus PAPR Hood

Canine-Rocket-TechnologiesCanine-Rocket-Technologies

1.3k
24
23
A reboot of the 60-LED Circuit Face Watch
Project Owner Contributor

DECKOTOO

Richard BryanRichard Bryan

2.6k
21
14
DIY 1000FPS Open Source Raspberry PI IMX219 MIPI CSI-2 Camera FPGA Interface To FX3 USB 3.0, Streaming 2Gbps UVC Video Stream up to 1000FPS
Project Owner Contributor

1000 FPS MIPI CSI-2 Camera Sensor FPGA Receiver

Gaurav SinghGaurav Singh

5.3k
20
15
A laser cuttable face shield
Project Owner Contributor

Face Shield (Laser Cuttable)

peter jansenpeter jansen

1.2k
18
16
https://hefnawi.me/posts/detect-sars-cov-2-near-infrared-spectroscopy/
Project Owner Contributor

Detecting SARS-CoV-2: Near-infrared spectroscopy

Ahmed Hefnawi (Volta)Ahmed Hefnawi (Volta)

1.9k
10
10
hacks to avoid touching shared surfaces in public spaces
Project Owner Contributor

Hands-Free

John OpsahlJohn Opsahl

358
6
3
Physical setup to simulate the back pressure and compliance of a human lung for testing ventilators
Project Owner Contributor

Human Lung Analog

Daren SchwenkeDaren Schwenke

610
5
2
A small ozone chamber built from junk to disinfect P3 (N99) mask filters.
Project Owner Contributor

Ozone disinfection chamber

consciousfleshconsciousflesh

736
5
5
Nintendo Classic controller adapter with keypad emulation for Atari 5200
Project Owner Contributor

Stingray

danjovicdanjovic

4.6k
4
6
What do you do when a pandemic hits, and your climbing gym closes? Why, make your own, of course.
Project Owner Contributor

Backyard Woody Climbing Wall

Pete HoffswellPete Hoffswell

695
3
4
A simple 20 second no touch countdown timer using and Arduino UNO, an HC-SR04 Ultrasonic sensor and a 7 segment display.
Project Owner Contributor

No Touch Hand Washing Countdown Timer

Paul McCabePaul McCabe

696
2
2
Helmet with rotating laser, indicating how much distance people should keep from me
Project Owner Contributor

Social distancing helmet

Hendrik-JanHendrik-Jan

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2023 Hackaday