0%

0%

Viviyorg

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 03/24/2019.

Projects I Like & Follow

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

irene-wolf Irene Wolf

The 2017 Hackaday Prize

To solve the age-old first-world-problem of having too many automatic mechanical watches, configurable from a smartphone!

IoT Mechanical Watch Winder

The 2016 Hackaday Prize

Over the last 10 years or so my personal home automation controller has grown and grown.

Home Automation Console.

By means of motor vectoring

Model rocket with active stabilization

A new way of thinking to a IOT thermostat:

FCThermostat: Another overengeneered IOT device

Raspberry Pi 3B based robot, distance sensors, and ROS.

Wall Following and Obstacle Avoidance

sinclair-gurny Sinclair Gurny

A MIDI controller with arcade push buttons and 32 RGB LEDs

MIDI Fighter

This rapid prototyping project is to create a functional Mandalorian vambrace. Priority is to function, then to form.

Mandalorian Infiltration Vambrace

srinlife sr.in.life

A successful attempt to create a programmer for the Atmel Tiny 4-10 using a Microchip PIC10f200 and few discretes

PIC10f200 Tiny TPI programmer

A 140MHz - 3GHz 2-port T/R VNA and software

Low cost open hardware VNA

The 2017 Hackaday Prize

Cube shaped objects that will attach to each other and move each other which will result in a low resolution programmable matter (LRPM).

Low Resolution Programmable Matter

Unofficial Badge of Talent Land 2018

The badge of the Lands

The mysteries of the cube v2.0 are unveiled

bom2buy cube

The 2017 Hackaday Prize

Networked energy-metering nodes (at 10A 85-265VAC) nodes for home and building automation. And smart capacitive light switches, too!

Networked energy metering and home automation

This is a L298 motor driver from Open-Electronics.org and a BeagleBone Black w/ Python software using Adafruit_BBIO.

BeagleBone Black and a L298 Motor Driver

.........Security hacker....... Ethical hacking how to secure my computer

Computer Hacking

ahmednaseruddinmoiz

A not-quite-successful attempt at a closed-loop CNC plotter using DC motors and a Raspberry Pi.

Pi CNC Plotter Fail

daniel-james-evans Daniel James Evans

Development of a PCB to control RGBW lights using XBee-3 Modules and MicroPython adding 16 PWM-Channels over I2C.

XBee 3, 16 PWM Channels, Control RGBW Lighting

heinz-peter-liechtenecker Heinz-Peter Liechtenecker

View all

Bits