0%

0%

Bert van den Berg

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/25/2017.

My Projects

The 2017 Hackaday Prize

Black box for trucks. Log GPS position, speed, 3D accelerometer/gyro, temperature, wind speed/direction, CANBUS data to SD card. Radio COMS

Black box data logger for heavy vehicles/trucks

Bert van den Berg

Projects I Like & Follow

The 2015 Hackaday Prize

Development of a robust low cost 3D printed hand prosthesis using off-the-shelf components.

biohand - Low cost 3D printed hand prosthesis

Martin Vincent Bloedorn

This tutorial will show you how to configure volumio to support HIFI DAC.

How to configure volumio to support HIFI DAC.

Managing ESP8266, interfacing to old workhorse 8051 and controlling electrical loads over WiFi network from an Android based cell phone.

ESP8266+8051+Android phone

The 2016 Hackaday Prize

An open source 3D printable robotic prosthetic leg.

Drakkar - printable robotic prosthetic leg

David Sanchez Falero

Wireless weather station with wireless link to indoor unit uploading to Weather Underground

Weather Station

Official Hackaday Prize Entry

To dive a little deeper into eletronics and arduino programming, I created an 4x4x4 RGB Led Cube. Bluetooth is still to be done.

IoT RGB Led Cube 4x4x4 with Bluetooth

Build a robotic arm which will be controlled with an Android phone via the Audio Jack.

Build an Android-controlled robotic arm

This project will be a cartesian style 3D printer, geared towards beginners or individuals who want to explore 3D printing as a hobby.

Cartesian Style 3D Printer

The 2015 Hackaday Prize

Low cost radio module highly stable

PK-RF-31 low cost IoT radio module

Just add smart-phone. MobBob is a walking, talking, seeing, listening robot companion that you can 3D print and build for around USD$30.

MobBob - Smart-phone powered robotic companion

This is an upcycled AM Tube Radio

Radio

combines the simplicity of Arduino with the scalability of ZigBee. Aurbee is, essentially, a wirelessly distributed Arduino platform.

Aurbee

4DOF robot arm for fun and education

3D Printed Arduino Robot Arm

Fitting a modern DAB radio into an old Bakelite radio. Also using a Bakelite extension speaker for Stereo

DAB Radio in Bakelite Set

MIDI controller using capacitive sensors as "holes" of a flute and an air flow sensor to measure air flow through a mouth piece.

Electric Flute

Getting Started with PADI IOT Stamp module from Pine64 | AT Commands

PADI IOT Stamp module from Pine64

A box of relays, outlets, and wires.

Home Automation

Bobby Christopher

The 2016 Hackaday Prize

Useful, affordable automation without any permanent house modifications

HAFT (Home Automation For Tenants)

View all

Bits