0%

0%

Dave

Photographer, designer, and DIY guy. My latest interest has been arduino and smart home devices.

Howell, MI

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/17/2023.

Projects I Like & Follow

I wanted to make a low cost drone with all the bells and whistles, so people working with a small budget can get into the drone game. ~$50

ESP32 Drone

A low-power E-Paper weather display powered by an ESP32 microcontroller. Utilizes the OpenWeatherMap API.

ESP32 E-Paper Weather Display

A LISP-programmable laptop with battery life measured in years

PotatoP

andreas-eriksen Andreas Eriksen

Supplyframe DesignLab: 2023 Hackada…

Monitor your favorite plant and get the state displayed on an e-paper. Simple, elegant, and with minimum energy consumption.

Smart Plant

A fully custom Arduino E-Paper BLE clock in a 3D Printed case using nRF52832 with one year run time one a single 18650

Triink - low power BLE E-Paper Clock

aaron-christophel Aaron Christophel

Putting my house in order

Shop Reorganization

david-tucker David Tucker

Custom firmware for the CH552 found in those USB RGB macropads with a rotaty knob

RGB macropad custom firmware

Instead of telling where you are in a day, this clock tells you where you are in a year

Year Clock

voja-antonic Voja Antonic

M-BUS HAT to extend your Raspberry Pi with smartmetering functions

M-BUS HAT for Raspberry Pi

Use Raspberry pi Pico simulator to start programming Pi Pico. you will interface 7 segment display & slider to Pi Pico

Raspberry Pi Pico Simulator - 7 segment display

open-technology Open Technology

ESP32 Bluetooth Home Automation system to control 8 home appliances with Bluetooth, IR remote, and manual switches. No Wi-Fi is required.

ESP32 Bluetooth Home Automation With IR Remote

Arduino program to generate IR remote control ON/OFF toggle signal when lights are turned on, or periodically to clean the air in workshop.

Automated Jet Air Filtration Remote Control

Supplyframe DesignLab: 2022 Hackada…

Corvair - Prius The goal: transplant all of the drivetrain and electronics from my 2010 Prius into my 1964 Corvair Monza 500

Corvairius

A small GPS/GNSS module comes with very low operating voltages, very helpful in retrieving time and date using satellites.

Reyax RYS8830 GPS/GNSS Receiver Module guide

sagar-001 Sagar 001

Deep Learning on the edge is now possible with lightweight computing hardware such as the Raspberry Pi 4 using TensorFlow Lite!

Pose Estimation on the Raspberry Pi 4

ecd1012 ecd1012

2021 Hackaday Prize

This software was designed for II's (Independent Investigators).

DBCreator

ddisthatoneguyyouknow

Breadboard base with attachment slots for various modules

Modular Breadboard Base

testudor-jakob testudor | Jakob

A small decoder which can decode the NEC protocol signals from your TV remote in Hexadecimal form. A small project with proper library/ code

IR Remote Decoder using Arduino Nano

View all

Bits