0%

0%

brandon

I make things sometimes! Laser cutter/CNC/3D Printer. PCBs and crafts

North Idaho, USA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter

This user joined on 05/04/2021.

My Projects

Smart dimmer for 0-10v lights without needing 4+ devices on wifi

Custom ESP8266 4 channel 0-10 dimmer

brandon brandon

Things I've Built

Backlit wall decoration made from PCB

I was a huge poppy fan so I started producing poppy symbols with LEDs on the back to make them glow. V1 was made from plastic with LED tape, V2 was made 100% out of PCB.

Projects I Like & Follow

The 2018 Hackaday Prize

The Automatic Infinite 3D Printer (i3D) gives anyone the power of a factory.

Automatic Infinite 3D Printer

swaleh-owais Swaleh Owais

A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp

Pick and place machine - Smoothieboard/OpenPnp

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

hugo-melder Hugo Melder

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

My second generation TDR which aims to be standalone (no oscilloscope) and as cheap as possible while being usable.

Standalone digital TDR (TDR-G2)

ms-boss MS-BOSS

A 16x7-Segment LED Clock that syncs time from GPS satellites.

gps_clock

Triple Cycloidal Brushless Actuator 25:1 Ratio

Simple Cycloidal Robot Leg for Quadruped

paul-gould Paul Gould

Resto-Mod Dungeons and Dragons Digital Dice Tower based on a 1975 Bell & Howell IMD-202 Digital Multimeter

1978 "Heathkit" D&D Digital Dice Tower

john-anderson John Anderson

The 2018 Hackaday Prize

UNMANNED GROUND VEHICLE, Compatible with Arduino

M1 Rover

ahmed-azouz Ahmed Azouz

The best of model rocket tech powered by Arduino!!

Arduino TVC ModelRocket

nikhil-mishra Nikhil Mishra

Easy to use Arduino Uno Shield to support your rockets from the ground!

WOOF Model Rocket Launchpad Computer V4

canine-defense-technologi Canine Defense Technologi

Adventures with an Ender 3

How to win at 3D printing

lion-mclionhead lion mclionhead

An electro-mechanical Valentine Day automaton with an 18 layer heart.

A 3D Printed Valentine For My Wife, With A Twist.

greg-zumwalt Greg Zumwalt

Powered from the 24v control circuit of a garage door opener. It can control the door and sense if the door is open/closed

Wi-Fi Garage Door Opener For Home Automation

2021 Hackaday Prize

5 Axis articulated robotic arm. Actuated by planetary reduced open-loop stepper motors.

PROJECT-A

sixthnassau Sixth_Nassau

Convert a doorbell into IOT / WiFi. Get a call with custom voice messages instead of a chime. Stick it anywhere as it is battery powered.

IOT Doorbell with a custom voice message

Low cost triple extrusion delta printer based on Raspberry Pi Pico

Raspberry Upside Down Delta

Final project of the AVR Architecture Course

Pong in AVR

paulson-k-antony Paulson K Antony

View all

Bits