0%

0%

Jihen Ben chikha

Hello !

Montréal

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 01/18/2023.

My Projects

Site specific device, Sound device

Talking House

jihen-ben-chikha Jihen Ben chikha

Project and research are in progress.

Chamber(S)

jihen-ben-chikha Jihen Ben chikha

Device and portable Kit

Site Sensing 0.1

jihen-ben-chikha Jihen Ben chikha

Interactive Sound Installation - Automatic Dispositif 2019

Co-existence Mechanical

jihen-ben-chikha Jihen Ben chikha

Things I've Built

Talking House

Projects I Like & Follow

Hackaday Prize 2019

Very new chip by Microchip(Atmel) ATmega4809 has a very unique CPLD like logic and also promised to be applied to next Arduino, why not try!

ATMega4809 developing board project

Get high-resolution 3D printing by building your own.

Laser SLA 3D printer with galvo

mark-peng Mark Peng

The 2016 Hackaday Prize

A robot to sail around the world alone

Ladon Project

The 2017 Hackaday Prize

4 Digit Nixie Clock driven by Raspberry Pi Zero and Arduinix board.

Raspberry Pi Zero Nixie Clock

maksim-surguy Maksim Surguy

The desktop with an arduino as the main processor. Multitasking, Gaming, Graphics, and (later) File IO

Arduino Desktop

dylan-brophy Dylan Brophy

Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.

Sigmoid S7P 3D Printer Control Board

M-Bus Shield for smartmetering with Arduino MKR

Arduino M-Bus Master Shield

1/2 Watt stereo audio amplifier with extra gain and loudness control.

LM386 stereo audio amplifier

carbonosilcio carbono.silício

Hackaday Prize 2020

This is the fast ISP programmer for AVRs based on cheap stm32f103c8t6 board.

FASTUSBasp programmer for AVR with usb-to-serial

amitesh-singh Amitesh Singh

Another Z80 single-board computer.

Z80 Single-board computer (with AVR controller)

Finally checked off designing a nixie clock from scratch from my bucket list

DIY Nixie Clock

sjm4306 sjm4306

This is the second version of a device I designed to alert me in the unfortunate event the nozzle clogs. It communicates with the printer!

3D Printer Clog Detector V2

elite-worm Elite Worm

In-Circuit Oscillator Calibrator for AVR Microcontrollers based on ATtiny84

TinyICOC

stefan-wagner Stefan Wagner

Sol can depict any position and trajectory of the sun. It shows this path using a 16 * 60 pixel led display

Sol

jelle-reith Jelle Reith

Designing a memory controller and OS interface to support multitasking on a 6502 with strictly-protected memory

Protected-memory multitasking for 6502 computer

Two 1.3" low cost 240x240 LCDs are used to create a 3D Display that needs no glasses.

DIY Arduino Parallax 3D Display

madaeon Madaeon

I thinked to made an electronic device that used for audio treatement

DSP Audio : 4 OUT - 2 IN

Hackaday Prize 2020

A device to limit community spread

Patient Zero - A device to limit community spread

View all

Bits