0%

0%

Amitesh Singh

A hacker who likes to learn new stuffs. Interested in hacking hardware.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 12/02/2015.

My Projects

Hackaday Prize 2020

This is the fast ISP programmer for AVRs based on cheap stm32f103c8t6 board.

FASTUSBasp programmer for AVR with usb-to-serial

Projects I Like & Follow

The 2017 Hackaday Prize

Miniature VT100 with all the bells and whistles

diy-VT100 - A Miniature hardware terminal

Kuldeep Singh Dhaka

Hackaday Prize 2020

A low cost NFT hydroponic garden design cheaper than most online kit solutions. Developed as a test bed for HydroPWNics

Low Cost NFT Hydroponic Garden (under $250)

The 2016 Hackaday Prize

Using the humble nrf24L01+ modules as BLE beacons to send and receive BLE advertisements .

BLE beacons from 1$ nrf24L01 modules

A stabilization system for drones using a pyboard, a MPU6050 and a RC receiver

Micropython Flight Controller

For any Power Rangers fan out there

Wristwatch Walkie Talkie

Orlando Hoilett

Automating feeding and watering of secluded plants via WiFi in a pseudo-IoT system

Arduino Grow Chamber

Heather-Lynne Van Wilde

The 2015 Hackaday Prize

The MobileNode is an open source GSM/GPRS and GPS/GLONASS 7cm circular board with a fully Arduino compatible MCU.

MobileNode

Use a raspberry pi and other cheap parts to make a bitcoin mining rig.

Raspberry Pi BTC Mining Rig

Robotic platform designed to operated in harsh conditions experienced in outdoor environments. Modular with easy to replace components.

Expandable Ruggedized Robotic Platform

The 2015 Hackaday Prize

a biofeedback wristband with galvanic skin response: giving insight into emotions

bioloop

A weighing scale using a ATmega48, a hx711 ADC and a 1x16 hd44780 display.

Weighing Scale in <1kB Code

This is my first try in making Toys. I am building a baby mobiles with LED's which are controlled by an Arduino and an old Apple Remote.

Arduino Controlled LED Baby Mobile

The 2015 Hackaday Prize

A 3d printed socket that will allow for on-location calibration of replacement arms.

Calibrated Prosthetic Socket for 3D Printed Arms

Daniel R. Dugan

Blinking (2x3W) LEDs with an ATTiny45 and a 240mAh battery

Blinking 6W of LEDs

Non-ICE Non-ICE

I am developing a remote control of G-gage train model by TOSHIBA FlashAir and Arduino (ATmega328).

Remote control of G-gage train model by FlashAir

Clock built from Soldering Practice board for Clocks for Social Good

Soldering Clock

The 2015 Hackaday Prize

Open source development platform for learning electronics, robotics and programming.

Oktopod: Dev Kit for Robo-ideas!

Full size deer antlers printed in transparent PLA, lit with addressable RGB LEDs.

3D Printed LED Fantasy Antlers

View all

Bits