0%

0%

james_willigar

I am a DIY/ Hobbiest . My minor years ago was in information system so I have some tech schooling , and self learning .

Maine

Following Follow me

Similar accounts worth following

This user joined on 02/21/2021.

Projects I Like & Follow

How to share a USB key and make a backup of a Dongle?

Share a USB dongle - Software Solution

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

hugo-melder Hugo Melder

Quick way to start with MCUs

Adventures with a STC89C52 development board

ken-yap Ken Yap

A simple arc welding circuit with high voltage arc starter and an optically controlled plotter.

Simple Arc Welder & Optically Controlled Plotter

dominik-meffert Dominik Meffert

Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.

Octoshield

goodwin GOODWIN

A 3D printed drone with an added pusher motor

3D Printable VTOL EDF Jet

harry-gao Harry Gao

FFT spectrum analyzer is an test equipment that uses Fourier analysis and digital signal processing techniques to provide spectrum analysis.

DIY FFT Audio Spectrum Analyzer

mircemk mircemk

A "Nanodrone" for environmental data collection and a Ground Control PSoC6 to interface the data to the cloud.

Nanodrone For IoT Environmental Data Collection

enrico-miglino Enrico Miglino

You get what you pay for!

Cheap But Crummy 10 GHz Transmitter and Receiver

Development Board for the new ATmega4808 Series of AVR Microcontrollers

ATmega4808 Development Board

stefan-wagner Stefan Wagner

1. Successful in europe (unheard of in US/canada) 2. Reduces ICU and MD burden 3. Fairly easy and cheap to manufacture

CPAP Helmet non-invasive ventilation

2021 Hackaday Prize

an automation cleanup mechanism that can clean and collect the piled up Sargassum in both shore land and water.

Caribbeans Sargassum Problem 4.0

anteneh-gashaw Anteneh Gashaw

Hackaday Prize 2020

Making fluid warmers accessible to relief camps and dispensaries

The 3$ Fluid Warmer

Measure air quality, sound, light, particulates, temperature, humidity, and more. Raspberry Pi and Arduino compatible.

Metriful: Indoor Environment Monitor

metriful-ltd Metriful Ltd

This project aims to design a generic robotics platform which can be cheaply produced and used in STEM programs and also in swarm robotics.

Low Cost Multipurpose Robotics Platform

gabriel-guimares Gabriel Guimarães

This project will show how to collect Realtime Bluetooth low energy data and show it on web browser.

Collect Realtime Data From Bluetooth Device

Mechatronic Project

LED cubes seen from a biological evolution perspective

The evolution tree of LED cubes

michael-mller Michael Möller

View all

Bits