0%

0%

Fin Mead

Comp Sci undergrad who has been tinkering for years :)

Suffolk, UK

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/31/2021.

My Projects

2021 Hackaday Prize

This drone allows for the high-speed transport of covid-19 tests and vaccines to hard to reach areas and people without mobility.

Corona Virus Test/Vaccination transport Drone

fin-mead Fin Mead

Projects I Like & Follow

The 2016 Hackaday Prize

Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

Mechaduino

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Single rotor, "singlecopter", selfmade drone with air vanes for position control as a full remake of the Ball-Drone Project

The Ball-Drone Project MK II

benjamin-prescher Benjamin Prescher

Official Hackaday Prize Entry

An affordable Arduino controlled multipurpose laser exposing device. Use it for SLA Printers, PCB Exposing, Laser Harp etc.

OpenExposer

mario-lukas Mario Lukas

The 2015 Hackaday Prize

The idea behind this project is to provide an open-source stand-alone Kinect and Raspberry Pi2 based 3D Scanner.

Open Source Kinect stand-alone 3D Scanner

mario-lukas Mario Lukas

Official Hackaday Prize Entry

Arduino powered rocket stabilization system for mid to high power rockets that gets rid of the pitch over and subsequent downrange flight

Arduino rocket stabilization system [UD: 7/14/17]

A Raspberry Pi internet world radio receiver

Raspberry Pi World Radio

abraham-martinez-gracia Abraham Martinez Gracia

Official Hackaday Prize Entry

This project is a clock with radio receivers which can receive the exact time from the GPS satellites or from the DCF77 transmitter.

"Connect" to an atomic clock in space! GPS, DCF77

The 2016 Hackaday Prize

This project shows how to use the MLX90620 or MLX90621 16x4 Thermopile Array from the Raspberry Pi

Raspberry Pi Thermal Imaging

alpha-charlie Alpha Charlie

The 2015 Hackaday Prize

FabScan PI is a Stand-Alone Web-Enabled Raspberry Pi based Open-Source 3D Laser Scanner

FabScan Pi - 3D Laser Scanner

mario-lukas Mario Lukas

The 2016 Hackaday Prize

Got a Raspberry Pi ? A few more bucks turn it into a networked SPI Flash chip reader/writer

SPI Flasher

yann-guidon-ygdes Yann Guidon / YGDES

The 2015 Hackaday Prize

This is an IoT based wireless Home Automation and Security System

Low Cost Wireless Home Automation and Security

sounak-ranjan-das Sounak Ranjan Das

The 2016 Hackaday Prize

A smart sensor Node to trigger an action on a smartphone each time a physical change is detected (temperature, displacement, click...)

Triggy - Sensor Node for Life Automation

Official Hackaday Prize Entry

We've connected our entire apartment, DIY style.

Practical Home Automation

fabricateio Fabricate.IO

The 2016 Hackaday Prize

Autonomous intelligent IOT nodes connected to the home network, controlled via simple IFTTT style rules, configured via web interface

WiFi Based Distributed IOT Home Automation

This is the Satellite Antenna Rotator mechanical system for my step motor driver board project.

Satellite Antenna Rotator Mechanical System

Official Hackaday Prize Entry

Sibling of the infamous Rail Gun, a coil gun launches ferrous projectiles at high velocities, that can seriously damage anything in its way!

Coil Gun

arvind-sanjeev Arvind Sanjeev

The 2017 Hackaday Prize

No more restrictions from high level software! Access the lowest level of radio transmission with this programmable USB stick.

Open narrowband RF transceiver

View all

Bits