0%

0%

Mark Gaffney

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/12/2018.

My Projects

Started as a collaboration with an Art student to 3D print a geodesic dome, using isosceles and equialteral triangles created using OpenSCAD

Geodesic Dome

mark-gaffney Mark Gaffney

An open guide to using shipping containers as modular, low-cost, and attractive housing; including design, tools, parts, and legal issues.

Shipping Containers to Homes

mark-gaffney Mark Gaffney

The 2018 Hackaday Prize

3D printed replacements for some broken and impossible to source clips for the privacy blinds in the rear of a luxury car

Daimler Blind Clips

mark-gaffney Mark Gaffney

Projects I Like & Follow

The 2016 Hackaday Prize

Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

Mechaduino

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2016 Hackaday Prize

LiFePO4 battery / UPS / power manager for Raspberry Pi

LiFePO4wered/Pi

patrick-van-oosterwijck Patrick Van Oosterwijck

While you could use a WiFi shield, or one of the many, many, ESP8266-equipped 'duinos out there, why not just make your USB cable WIRELESS?

Wireless USB for Instant IoT

thane-hunt Thane Hunt

The 2015 Hackaday Prize

Rasky is an expansion board for raspberry pi model 2, a collection of software and some 3d models to build an open source KVM over IP

Rasky, raspberry pi 2 KVM over IP

stefy-nextime-lanza Stefy (nextime) Lanza

The 2017 Hackaday Prize

Next Gen LiFePO4 battery / UPS / power manager for Raspberry Pi, ideal for headless and IoT use

LiFePO4wered/Pi+

patrick-van-oosterwijck Patrick Van Oosterwijck

The 2016 Hackaday Prize

A new smart mirror design.

Reflectrum - Smart Mirror

chris-gervang Chris Gervang

The 2016 Hackaday Prize

Autonomous intelligent IOT nodes connected to the home network, controlled via simple IFTTT style rules, configured via web interface

WiFi Based Distributed IOT Home Automation

The 2015 Hackaday Prize

Custom electromechanical motor that can be printed using any 3D printer, some coil, maybe magnets and a controller.

3D Printed Parametric Motor

Improving a Griffin Beacon to add Bluetooth RF control, Command sequence sending and USB power

Ultimate Universal Remote

joedefa joedefa

The 2016 Hackaday Prize

Always wanted to unleash the power of an FPGA chip? Interested in robotics and vision? Then this might be the project for you!

FPGA-based camera vision for everyone

dennisvanelteren

The 2016 Hackaday Prize

Eliminate belts, pulleys, leadscrews.

linear stepper motor 3d printer

Use your PIC-Projects on Mini-PCIe (USB/SMBus)

Mini-PCIe - PIC18LF2550 - DevBoard

I use the Ada language on a STM32F4 to turn an old hard drive into a solenoid engine.

Software controlled solenoid engine

Fabien-Chouteau

The 2018 Hackaday Prize

I want to work out whether or not it is possible to grow vegetables indoors in sealed, airtight containers.

Growing vegetables in sealed containers

willstevens will.stevens

The 2017 Hackaday Prize

IOT smoke and fire alarm to send SMS notification if it detects smoke and leakage of combustible gas.

IOT smoke alarm with SMS notification

OpenDAC HD

mike-lu Mike Lu

Augmented Reality Noughts and Crosses Game

Augmented Reality Noughts and Crosses Game

edgaras-art Edgaras Art

View all

Bits

Patrick Van Oosterwijck wrote 03/21/2018 at 02:01

Thanks for following my #LiFePO4wered/Pi project Mark! You might also want to check out my next generation version, the #LiFePO4wered/Pi+ ! :)

Are you sure? yes | no