0%

0%

vanstippelen

Electronic esp fan esp easy tasmota domoticz arduinod siemsn plc

Belgium

Following Follow me

Similar accounts worth following

This user joined on 06/05/2021.

Projects I Like & Follow

The 2017 Hackaday Prize

An open, superior, low cost alternative to FDM 3D printing that takes advantage of high res LCD technology and modern curable resins.

Low Cost, Open Source, LCD based SLA 3D Printer

A last gasp Uninterruptible Power Supply for any Raspberry Pi computer.

Single SuperCapacitor UPS for Raspberry Pi

bud-bennett Bud Bennett

The 2016 Hackaday Prize

A $200 smart Linux drone with the Pi Zero and the PXFmini autopilot shield.

Pi0drone

vctor-mayoral-vilches Víctor Mayoral Vilches

Focused on making clear every building step with helpful links and tips for total noobs (like me) who wants to get started with drones

My first copter build with RPi2 and Emlid Navio2

dmitriy Dmitriy

Hackaday Prize 2019

Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.

Bobble-Bot

mike-moore Mike Moore

A MAX7219 driven Display, controlled by an ESP8266 SoC and MQTT

ESP8266 MAX7219 Dot Matrix Display as MQTT Client

ninharp ninharp

The desktop with an arduino as the main processor. Multitasking, Gaming, Graphics, and (later) File IO

Arduino Desktop

dylan-brophy Dylan Brophy

The 2018 Hackaday Prize

diy direct-drive extruder 3D printer running Klipper firmware

protoDEV 3d printer

michal-wojciechowski Michal Wojciechowski

Use of solar panel and supercapacitor to enable an 3.3V 8MHz ATMega386P to function as remote IoT solution using LoRaWAN.

Solar & supercap charged LoRaWAN IoT device

Add a second brain to your Arduino Mega

RetroShield for Arduino Mega

How to get the Onago to, well, fly!

Onagofly Hacking

The 2018 Hackaday Prize

Open-Source companion robot for teaching and playing

Rhoby.The Social Robot.

ilyas-akhmetzyanov Ilyas Akhmetzyanov

The 2017 Hackaday Prize

Super Simple IoT Button. Easy to build and easy to program

A.I.B (Another IoT Button)

hendra-kusumah Hendra Kusumah

The 2018 Hackaday Prize

Do you want a drone ready to be in the air 24 hours/day, 7 days/week? We're propossing this automatized drone supercharger. Go up darling!!!

Drone Supercharger

frasanz frasanz

Slide this Japanese style hand plane along any rough corners to give them a clean chamfer (AKA beveled edge). Uses a standard razor blade.

3D Printed Chamfer Tool

alex-rich Alex Rich

how to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.

Home Automation Using Blynk & ESP32 IoT Project

Hackaday Prize 2020

We show how to build IOT WiFi Motion Sensor powered on a battery with email notification over IFTTT.

WiFi Motion Sensor (3D print) - DIY

The Icarus is a FeatherWing-compatible (Feather) board with the nRF9160, made for easy cellular IoT development.

Icarus IoT Dev Board nRF9160 (LTE-M, NB-IoT, GPS)

View all

Bits