Close
0%
0%

Bryan P. Lillibridge

loves human augmentation, rf, and other tech

64788
Following
Similar accounts worth following
1 Followers
81 Following
0 Projects
0 Likes
bryan-p-lillibridge

This user joined on 10/12/2020.

8.1k
1.8k
4
65
EBM - 3D Metal & Ceramic Printer - Electron Beam Melting
Project Owner Contributor

3D Metal & Ceramic Printer

agustin-cruzAgustin Cruz

5.9k
53
4
38
A very compact, very inexpensive, very DIYable, very precise little CNC mill. This one uses 3d printed parts.
Project Owner Contributor

Minamil 3dp: another minimal CNC mill

paul-mcclayPaul McClay

4.6k
2.1k
0
30
A companion for your cats and dogs.
Project Owner Contributor

Zakhar the Robot

andrei-gramakovAndrei Gramakov

3.5k
29
4
26
Sticking 2 magnets and one piezo stack, you can make a nanoresolution piezo motor in 10 seconds
Project Owner Contributor

Hacking any linear slide/bearing into piezo motor

edwin-hwuEdwin Hwu

2.9k
3k
0
12
How to generate frequencies below 10Hz using a PC, an amplifier, and a handful of components.
Project Owner Contributor

Extreme Low Frequency Signal Generator

joseph-eoffJoseph Eoff

2.6k
688
3
13
This project demonstrates how to build a battery powered IoT Wi-Fi button in less than 10 min. This example controls HUE lights over IFTTT.
Project Owner Contributor

WiFi Button

sylwesterSylwester

2.1k
616
0
22
An open source oximeter device for measuring SpO2
Project Owner Contributor

uOxy - open source pulse oximeter

ultimate-roboticsUltimate Robotics

2k
1k
0
4
Building OnStep with Kicad (with all necessary footprints and 3d image files).
Project Owner Contributor

My OnStep Kicad Project

michael-otooleMichael O'Toole

1.7k
15
4
13
Lots of "Desktop CNC" machines can fit on a desktop. But do they fit _on_your_desk_? Like, between the stapler & paper tray?
Project Owner Contributor

"Desk Accessory" CNC Milling Machine

paul-mcclayPaul McClay

1.2k
1.2k
0
5
Light control for rooms containing both Philips Hue and Nanoleaf lights using their respective REST APIs
Project Owner Contributor

Raspberry Pi Hue/Nanoleaf Light Switch

tim-schonbergerTim Schonberger

1.2k
1.1k
4
9
3D LED cylinder - remix of makeTVee
Project Owner Contributor

3D LED cylinder - remix of makeTVee

kmatch98kmatch98

887
882
0
1
This project is about building your own stopwatch using the Arduino board and a few other components.
Project Owner Contributor

Arduino Stopwatch

hiotronhIOTron

391
389
0
2
Social Distancing Wristband Wearables products to help people fight with Covid-19 Coronavirus.
Project Owner Contributor

Social Distancing Wristband Wearables

torr45838torr45838

276
1
0
2
Watercooled MATx build with built in goodies for plug-n-play computing and art.
Project Owner Contributor

Luggable Cyberdeck

tracespazerTraceSpazer

244
239
0
10
A remote experience for streaming audiences to control robots.
Project Owner Contributor

Remoticon: Crowd-Controlled Robots

lutetiumLutetium

233
233
0
3
Time encoded in RGB
Project Owner Contributor

RGB Clock

jj

220
218
1
2
The project was created as a part of the Basics of Mechatronics course at AGH University of Science and Technology in Kraków.
Project Owner Contributor

Firefighter Robot - Finished

mechatronicproject10mechatronicproject10

110
3
0
3
Open source test SW and HW that can measure magnetic force of actuators or solenoids
Project Owner Contributor

Actuator Function Tester

open-source-actuatorOpen Source Actuator

View all

Share this profile

Share

Bits

Send a private message to Bryan P. Lillibridge

Become cool instantly

Create your Hackaday.io profile like Bryan P. Lillibridge and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Bryan P. Lillibridge", please tell us the reason.