0%

0%

ABC8 RED

ABC8 - Thế Giới Cá Cược Trực Tuyến Đẳng Cấp Nhất 2024

Following Follow me

Similar accounts worth following

This user joined on 06/13/2024.

Projects I Like & Follow

The 2016 Hackaday Prize

A smart sensor Node to trigger an action on a smartphone each time a physical change is detected (temperature, displacement, click...)

Triggy - Sensor Node for Life Automation

Supplyframe DesignLab: 2023 Hackada…

Strip down PET#1 Recyclable plastic bottles. Convert into new usable 3D filament. Load up your favorite 3D printer and recreate!

The Recreator 3D - Make Recycled PET#1 3D Filament

joshua-r-taylor Joshua R. Taylor

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

The 2016 Hackaday Prize

Over the last 10 years or so my personal home automation controller has grown and grown.

Home Automation Console.

Connect all needed electronics to NodeMCU, add life to them with a help of programming, install HomeAssistant on PC and let's roll!

Home Automation With NodeMCU, HomeAssistant & MQTT

New JDM / PICkit development tool for interfacing just what you need

Smart JDM launchpad

marius-taciuc Marius Taciuc

The entire rocket and the fuel are all made of 3D printed PLA.

Fully 3D printed rocket with 3D printed fuel

This is a simple beginner DIY project with low component count and small budget.

7 Band Audio Spectrum Analyzer

samm928 samm928

Get notified when your washer and dryer finish.

Easy Laundry Monitor

adam-demuri Adam Demuri

This clock uses 4 vertical slides that contain the numbers and stepper motors position the slides so to display the correct time.

Slide Clock

craig-colvin Craig Colvin

Collate weight, color, and emitted ionizing radiation of foods to train a NN. Then, run it on Beetle C3 to detect food irradiation doses.

IoT AI-driven Food Irradiation Dose Detector

kutluhanaktar kutluhan_aktar

Using the built-in reed switch on the mcMod120, we'll show you how to setup a super easy way to be alerted and track opening doors!

Wireless IoT Door Open/Closed Sensor

In the Lora IoT project tutorial, I have shown how to make the LoRa Arduino ESP8266 control relay from the Blynk IoT platform with feedback.

LoRa IoT Project With Arduino ESP8266 Blynk

A RP2040-based Board with 32-bit Audio Output and 8x 12-bit 1MSPS ADC for creating standalone synthesizers and noise boxes.

PicoADK - Audio Development Kit

A nicer version of my AT90S1200 binary clock

Binary clock rebuild

Simple way to make a ESP8266 clock on a VFD display that synchronizes the exact time through NTP time servers on the Internet.

Simple ESP8266 NTP Clock on VFD Display 256x50

mircemk mircemk

The PCB on this project is called "NOOBIX" and gives you full IOT control for anything.

NOOBIX IOT

LED & RGB-LED directly 230v AC

LED & RGB-LED directly 230v AC

utsourceproduct

View all

Bits