0%

0%

Oğuzhan

Hi, I'm Oğuzhan. I am studying at Necmettin Erbakan University in the department of electrical and electronics engineering.

Turkey, Konya

Following Follow me

Similar accounts worth following

This user joined on 03/03/2022.

Projects I Like & Follow

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

The EdgeX uses LoRa to transmit Video and Image data over hundreds of kilometres without Internet using the onboard AI processor.

LoRa Image and Video transmission | AI on EdgeX

akarshagarwal98

2021 Hackaday Prize

Now in the 3rd iteration stage, this 3D printable single rotor drone with thrust vector control offers more safety and features than ever!

The Ball-Drone Project MK III

benjamin-prescher Benjamin Prescher

Hackaday Prize 2019

An open-source four-legged robotics platform

Spike, the Robot Dog

michael-g Michael G

Open-source design for a 3d printer that can print metal at a low cost.

FDM 3D Metal Printer

How to generate frequencies below 10Hz using a PC, an amplifier, and a handful of components.

Extreme Low Frequency Signal Generator

joseph-eoff Joseph Eoff

An open-source dual-channel SDR Raspberry Pi HAT with up to 6 GHz tunable range

CaribouLite SDR for RPI

david-michaeli David Michaeli

2021 Hackaday Prize

A resilient strip (of tape measure fame) triad fed through centrally driven rollers extends a structure constrained by self spacing ribs

OBoom: low cost deployable linear actuator

Emulate a small size ROM with a RAM and Arduino with Intel-HEX interface

ROM-emulator

fjkraan fjkraan

Diode/transistor switching circuits

Discrete Component Switching. flip flop etc.

alan-cyr Alan Cyr

This smart relay can sense the room temperature and sunlight to turn on and off the fan and light bulb. You can monitor the same from mobile

IoT Based Home Automation With Blynk and NodeMCU

$hmoney is an antweight competition combat robot powered by a Raspberry Pi Zero W

$hmoney, a Combat Robot Powered by Raspberry Pi

sebastian-zen-tatum Sebastian Zen Tatum

The main goal of this project is to design a Voice-Controlled Home Automation System without replacing the existing Switchboard.

IoT at just 7$ in your existing switchboard

The purpose of my project is to build a system for tracking satellites in orbit.

Build a System for Tracking Satellites in orbit

Wired doorbell sensor running Firmata that can be used by Home Assistant

Wired doorbell sensor for home automation

Make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback & No Wi-Fi control.

ESP8266 Home Automation Project with Blynk NodeMCU

The default speed of the Raspberry Pi Zero 2 W is 1GHz. The speed may be increased to 1.2GHz or even 1.4GHz.

Overclocking the Raspberry Pi Zero 2 W to 1.4 GHz

Modbus Display (Software)

hasan-kara hasan kara

View all

Bits