0%

0%

Giovanni

Working on software, playing with hardware

Italy

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 03/11/2021.

My Projects

Airspeed sensors are quite expensive, while barometers are cheap. So why not making an airspeed sensor using 2 barometers?

Cheap airspeed sensor for INAV

Projects I Like & Follow

The LittleArm is a 3D printed Arduino robot arm created for Makers and STEM education

LittleArm: 3D Printed Arduino Robot Arm

How to share a USB key and make a backup of a Dongle?

Share a USB dongle - Software Solution

RGB LEDs Triangular/Hexagonal Pixels Matrix.

RGB HexMatrix | IOT Clock

mukesh-sankhla Mukesh Sankhla

ARM Cortex-M4 + ARMv8. Motor interfaces. 54 I/O with UART, SPI, I2C, CAN. C++ 11 API. Cloud management. ROS-powered.

CORE2 - A computer for robots

How I added a 500W heater to my 3D printer to enable reliable ABS printing.

Enclosure Heater for 3D Printer

mark-rehorst Mark Rehorst

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

How to get the Onago to, well, fly!

Onagofly Hacking

Hackaday Prize 2019

This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32

Electric Bobby-Car

peter-ptzi Peter Pötzi

The 2017 Hackaday Prize

Datalogger WIFI and Bluetooth for the IOT product

IOT Datalogger

reginald-sourn Reginald Sourn

Make a filament spool holder real quick.

30 Second 3D Printer Filament Spool Holder

andy-lee Andy Lee

The 2017 Hackaday Prize

Super Simple IoT Button. Easy to build and easy to program

A.I.B (Another IoT Button)

hendra-kusumah Hendra Kusumah

I will test the usability of the RF Explorer 3G+ IoT module from seeedstudio

Basic spectrum analyser with RF Explorer 3G+ IoT

dorijan Dorijan

Convert Kicad PCB files into GCode with isolated PCB Nets

PCB Isolation Routing Software

michael-schembri Michael Schembri

This device converts your fdm printer to a full color powder printer.

ColorPod full color 3d printing

This project has an esp8266 giving Wi-Fi functionality, LoRa module, 1.8 inch TFT display and buttons. You can make LoRa Remote or messenger

LoRa Remote Control Messenger With a 1.8" TFT

akarshagarwal98

The Icarus is a FeatherWing-compatible (Feather) board with the nRF9160, made for easy cellular IoT development.

Icarus IoT Dev Board nRF9160 (LTE-M, NB-IoT, GPS)

This workshop is focused on reverse engineering and utilizing hardware-level debuggers.

Remoticon: The Hackers Guide to Hardware Debugging

Remote control for Raspberry Pi GPIO peripherals

Remote RasPi GPIO control

peter-walsh Peter Walsh

View all

Bits