Close
0%
0%

Yusuf Khan

Mechatronics engineering student. Working in an agritech startup. Devoted to the Sustainable Development Goals

Pretoria, Gauteng, South Africa
Following
Send a private message
Similar accounts worth following
4 Followers
8 Following
0 Projects
0 Likes
yusuf-khan
Send a private message

This user joined on 02/25/2015.

1.3k
14
4
13
Join this project to contribute to the story
Project Owner Contributor

A sci-fi adventure by hackaday.io

shlonkinshlonkin

92.6k
840
44
211
Build your own DIY Point of Sale using a Raspberry Pi ZERO​/a+/b/b+/2 with a mini thermal receipt printer and IoT funtions.
Project Owner Contributor

IotPOS a Point of Sale for Raspberry Pi

hiram-villarrealHiram Villarreal

74k
587
42
177
The only thing worth doing, is the thing worth doing right!
Project Owner Contributor

DAV5 V3.01 Raman Spectrometer

david-h-haffner-srDavid H Haffner Sr

36.5k
433
33
257
A tiny processor board the size of a 16 pin DIP with Bluetooth Low Energy
Project Owner Contributor

OSHChip V1.0

philipPhilip

35.2k
852
58
290
HeartyPatch is a fully open-source, IoT connected, BLE enabled heart-rate variability & ECG patch with great accuracy
Project Owner Contributor

HeartyPatch: A single-lead ECG-HR patch with ESP32

ashwin-k-whitchurchAshwin K Whitchurch

34.4k
290
34
206
A 75 watt MPPT Solar Charger with tons of features. Efficiency > 97%, USB interface, data logging, 2 USB charging ports and much more...
Project Owner Contributor

High Efficiency MPPT Solar Charger

lukas-fsslerLukas Fässler

15.9k
48
16
47
An Affordable cloud connected water level measuring station for developing countries.
Project Owner Contributor

Affordable Water Level Measuring Station

benneBenne

14.3k
3.4k
14
109
4+ custom bands multispectral camera based on RasPi 3 and raspi camera multiplexer with geotagging and environmental montoring capabilities
Project Owner Contributor

RPi Multispectral Camera for Agriculture

andres-felipe-gomez-rAndres Felipe Gomez R.

13.8k
97
4
73
A mist-based tower system for growing leafy green vegetables
Project Owner Contributor

The Little Green Tower

chris-johnsonChris Johnson

13.6k
90
22
79
An electrically actuated variable pitch rotor with a wireless interface
Project Owner Contributor

EVPR: Electric Variable Pitch Rotor

peter-mccloudPeter McCloud

9.9k
2k
17
112
Sub 1GHZ RF wireless modules operating at 915MHZ and 433MHZ ISM bands, based on the ADF7023, full open source!
Project Owner Contributor

S1G RF: Sub 1GHZ Radio Modules 915MHZ and 433MHZ

avrAVR

8.2k
74
5
39
Open Source interface to connect LCD's (5" and 7") to any Board/Micro-controller using HDMI and SPI
Project Owner Contributor

OLI (Open LCD Interface)

joe-mendiaJoe Mendia

8.1k
104
7
87
The low cost (35$) GSM,GPS enabled clip-sensor device to measure leaf chlorophyll content, fluorescence and detect nutrition deficiency.
Project Owner Contributor

FarmCorder: Crop nutrition deficiency sensor

vignesh-ravichandranVignesh Ravichandran

6k
771
8
35
This project will focus on making current research in field of Visible Light Communication (VLC and LiFi) usable and meaningful for use...
Project Owner Contributor

Visible Light Communication for the masses

jovanJovan

5.5k
53
2
48
USB Type C has up to 100W of charging capability, perfect for a multicell charger
Project Owner Contributor

Small Multicell USB Type C Charger

chris-hamiltonChris Hamilton

3.6k
3.5k
8
20
Breathing new life into a Stratasys Dimension 768 with a Smoothieboard 5X
Project Owner Contributor

3D printer brain retrofit

machinistmachinist

3.5k
599
5
46
Original design v-tail quadcopter, all pieces 3D printed. 2213 935kv motors running 10.5 inch props with a 4400mah battery.
Project Owner Contributor

Raptor V-Tail Quadcopter Drone

kendoken.do

3.1k
326
0
14
This is a control application using telegrom bot api and rpi. With this application you can control your devices or read sensors data
Project Owner Contributor

Telegram Control Application With Raspberry Pi

erhanyilmazytuerhanyilmaz.ytu

2.7k
23
5
20
A project that documents the installation, preparation and testing of the DesignLab's new Injection Molder
Project Owner Contributor

Morgan Industries G-125T Injection Molding Machine

supplyframe-designlabSupplyframe DesignLab

View all

Share this profile

Share

Bits

David H Haffner Sr wrote 05/01/2017 at 20:25 • point

Thank you for the follow :)

  Are you sure? yes | no

Send a private message to Yusuf Khan

Become cool instantly

Create your Hackaday.io profile like Yusuf Khan and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Yusuf Khan", please tell us the reason.