Close
0%
0%

mselkin

Hobbiest

Winnipeg, MB, Canada
Following
Send a private message
Similar accounts worth following
1 Followers
30 Following
0 Projects
0 Likes
mselkin
Send a private message

This user joined on 11/01/2020.

144.3k
2.9k
81
605
Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.
Project Owner Contributor

DIY hobby servos quadruped robot

miguel-ayuso-parrillaMiguel Ayuso Parrilla

20.9k
3.6k
24
240
Blackbox shifts 3D printing towards a multitool manufacturing robot.
Project Owner Contributor

Multitool 3D Printer - Blackbox

marc-schmannMarc Schömann

14.9k
55
6
42
Create a series of boards designed for the RC2014 bus to achieve MSX/MSX2 compatiblity
Project Owner Contributor

MSX COMPATIBLE BOARDS FOR RC2014

dean-nethertonDean Netherton

14.1k
77
43
60
An ESP8266 , a ILI9341 display, a few buttons to build a working ZX Spectrum
Project Owner Contributor

ZX Spectrum emulator with ESP8266

aldoloaldolo

9.7k
5.1k
0
52
ARM Cortex-M4 + ARMv8. Motor interfaces. 54 I/O with UART, SPI, I2C, CAN. C++ 11 API. Cloud management. ROS-powered.
Project Owner Contributor

CORE2 - A computer for robots

husarionHusarion

9.2k
2.8k
0
22
for demonstration of physical laws in generating electrical energy using hydropower plant
Project Owner Contributor

3D printed hydroelectric power plant model

matic-markoviMatic Markovič

3.5k
2.8k
8
24
A 3D printed drone with an added pusher motor
Project Owner Contributor

3D Printable VTOL EDF Jet

harry-gaoHarry Gao

3.4k
3k
2
24
Grasp is a robotic hand designed to to be assembled by a non experienced user and can be useful for different applications.
Project Owner Contributor

Grasp Bionic Hand

xavi-canoXavi Cano

3k
31
0
26
An attempt to make an RC2014 module that emulates the TMS chip, with crisp DVI output and some additional RC2014 functionality
Project Owner Contributor

Emulated TMS9918A using RP2040/DVI

shiela-dixonShiela Dixon

2.4k
2.4k
2
20
Electromagnetic Lifting Module
Project Owner Contributor

ELM

mileMile

2.2k
11
2
9
in which I attempt to make an MSX1 compatible computer using RC2014, keeping to standard RC2014 backplane and modules as far as possible.
Project Owner Contributor

MSX on RC2014

shiela-dixonShiela Dixon

1.7k
1.7k
0
10
An open-source panoply of UAVCAN connected boards to enable smart sensors and actuators for modular robotics development
Project Owner Contributor

CVRA's Robotics CAN Ecosystem

salah-missriSalah Missri

1.7k
681
0
9
8-32 channel TI ADS1299 Arduino shield for EEG, EMG, and EKG bio-signals acquisition
Project Owner Contributor

HackEEG

adam-feuerAdam Feuer

1.6k
1.6k
2
7
Comparatively huge heat sink for Raspberry Pi sourced from old PC case
Project Owner Contributor

Raspberry Pi Heat Sink Recycled from PC

jeremy-s-cookJeremy S. Cook

1.5k
1.5k
2
2
Step-by-step instruction to install .NET Framework 4.5 on Raspberry Pi using ExaGear Desktop
Project Owner Contributor

.NET Framework 4.5 on Raspberry Pi

dmitryDmitry

586
539
1
3
A clock that uses time quotes from literature to tell the time on a Raspberry pi 7 inch display
Project Owner Contributor

Literature clock

philPhil

511
472
0
4
A 5 note chiming clock that gets time from either GPS or WiFi/NTP (via Raspberry Pi)
Project Owner Contributor

GPS (or not) chime clock

nick-sayerNick Sayer

253
249
0
4
The Nixie Hat allows an Raspberry Pi board to connect any nixie tube you want to use in your projects.
Project Owner Contributor

Nixie Tube Shield / Hat for Raspberry Pi

marcin-sajMarcin Saj

View all

Share this profile

Share

Bits

Send a private message to mselkin

Become cool instantly

Create your Hackaday.io profile like mselkin and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "mselkin", please tell us the reason.