Projects Sergey likes and follows

Sort by:

The 2017 Hackaday Prize

Micro Smart LiDAR Sensor

MappyDot

The 2018 Hackaday Prize

Make & 3D print your own phone with sensors, displays, electronics, batteries and antennas. Customize Android and do exactly your thing!

Kite : Open Hardware Android Smartphone

Driving controller-less graphics LCD with Arduino

Arduino CLGLCD

Ease and cheap Traffic Counter

Traffic Counter - Road Tube

A stabilization system for drones using a pyboard, a MPU6050 and a RC receiver

Micropython Flight Controller

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

Ok maybe its not the ULTIMATE drone but I didn't hold back on the parts list. Everything is designed to be super compact and customizable.

The Ultimate Pi Zero/Arduino/FPV Racing Drone

Hackaday Prize 2019

This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32

Electric Bobby-Car

Open source 3D printable DLP 3D printer.

Sunrise - DLP 3D Printer, printable.

We are going to create an AC Voltage Measuring Device using Arduino, which will estimate the voltage of Alternating Current.

AC Voltmeter using Arduino

hIOTron hIOTron

An 8-bit TTL computer with 8 bits of address space.

Boxer-1 TTL Computer

Hackaday Prize 2020

for demonstration of physical laws in generating electrical energy using hydropower plant

3D printed hydroelectric power plant model

Matic Markovič

Add an ESP8266 to a Philips LivingColors gen1 to control it over WiFi without losing the ability to control it with the remote

Philips LivingColors gen1 WiFi addon

Hörmann is the brand of the garage door and they have extra remotes but they are, to be fair, a bit pricey for my taste.

Hörmann Garage Door Remote Hack

Controlling standing desk by voice through google assitant, home assistant and esphome on esp8266

Standing desk remote control

By combining 3d parts, gyro, and a stepper, I made a programmable foot pedal for my cheap GTAW welder! General remote knob turner.

3d Printed knob turner - remote TIG amp control!

Hackaday Prize 2019

Loko is the 12 gram GPS tracker with extreme battery life.

Loko-the Tiniest GPS tracker with 270 days battery

Open Source Hardware GNU/Linux PowerPC Notebook project

OSHW GNU/Linux PowerPC Notebook

Roberto Innocenti

Arduino Sketch for ESP32, using RC-Switch(c) library and the ESP32 RMT peripheral to emulate RF remote controls (433/315Mhz)

ESP32 RMT peripheral for radio remote control

Talker/80 - New Dimensions in Voice Synthesis for the TRS-80

Talker/80 for the TRS-80 Model 1, 3, and 4

Design of involute gear tooth profiles and hints and tips for 3D printing real gears to do work.

3D Printing Gears and a Planetary Gearbox