Projects mpinner likes and follows

Sort by:

In this workshop, we'll make 3 different kinds of origami shapes.

Remoticon: Making Glowy Origami

K3lso is a quadruped robot similar to MIT mini cheetah and MIT Cheetah 3.

K3lso Quadruped

Modified Chroma74 shelf label to be my weather station display. It is 7.4" 3-Color E-Ink units that cost $12 on eBay.

7.4" E-Ink Shelf Label used as a Weather Station

This is a Walking ATAT using 8 Servos. Great robotics project!

Motorized Walking ATAT using Servos and Arduino

We’ll train a neural network, convert it to a TensorFlow Lite model, and load it onto an ARM micro-controller.

Remoticon: Tiny ML

In this workshop, we’ll be building a firefly together with custom jigs, brass wire, and LEDs.

Remoticon: Circuit Sculpture Workshop

Because we need to prove there are still things people do better than machines...

Robotic Trombone: The RoboTrombo Music Machine

16 Audio In & 16 Audio Out using only 5 pins

Dual Interleaved CS42448 Chip

Paul Stoffregen

This is a 8x8 WS2812b NeoPixel LED matrix that is completely flat surface and has the same 1.6mm height as a normal PCB

World's Slimmest NeoPixel LED Matrix

Remoticon - November 6th-8th - FAQ

FAQ: Remoticon 2020

in dressmaking this is called making a muslin

practice backpack

Candy in a 35mm film container is launched towards a trick-or-treater when they step on a foot pedal 50 feet away from the launcher.

Halloween Candy Mortar

A low cost 3d-printed quadruped design.

Quadruped robot BAI

Physical simulations harboring unfamiliar life.

Havens

In 1960 Hasbro unleashed its first personal "computer" to the masses, decades before IMSAI, Apple, or Commodore. Remembering Think-a-Tron.

Think-a-Tron 2020

Play without annoying the neighbors

Electronic 6-hole Ocarina

Controller board and hardware for raising targets, running shooting programs and counting points for Falling Targets Pistol range.

Falling Targets Controller

Henrik Sorensen

RGB Tube Lights made using Arduino Nano and WS2812B LEDs.

DIY RGB Tube Lights

3D printed bicycle turn and braking indicators using a 555 timer, LEDs, and super capacitors.

555 LED Bicycle Indicators

Stepper motor-based jogwheel

SM JogWheel

Adapting the FlySky altimeter to produce a variometer function.

FlySky Variometer