ventosus-
Plated slots for OSHPark in KiCAD
09/14/2015 at 20:01 • 0 commentsI have always thought that OSHPark do not support plated slots at all.
But this is actually not true anymore, they (OSHPark) just don't officially support it ;-)
You apparently have to mark the plated slots on the outline/edge layer for the fab-house to note as described here:
http://support.oshpark.com/support/solutions/articles/134889-internal-cutouts-and-slots
A more in-detail description on how to do this in KiCAD can be found here:
https://forum.kicad.info/t/oval-pads-not-possible-for-oshpark/835/4
- Draw a line on the outline/edge layer and set its diameter to the slot's width, it's as simple as that
If you follow the instructions, OSHPark should give you a preview with plated slots (and hopefully the fab-house will do as isntructed, too).
- Draw a line on the outline/edge layer and set its diameter to the slot's width, it's as simple as that
-
WANTED: Chimaera Beta Testers
12/31/2014 at 08:30 • 0 commentsAfter a high interest at Maker Faire Rome, we are now running a beta-testing campaign to collect more comprehensive feedback of first-hand experiences of our final Chimaera prototype design from interested individuals. Get in contact with us for a month of free testing (excl. shipping).
-
Chimaera wins FIRST PRICE at "WIZnet connect the Magic 2014 design challenge"
09/22/2014 at 09:01 • 0 comments
This user joined on 06/05/2014.
My Pages
Things I've Built
Chimaera - the poly-magneto-phonic theremin
The Chimaera is a touchless device giving the player highly resolved, low-latency control over two continuous dimensions. http://open-music-kontrollers.ch/chimaera/
Projects I Like & Follow
peter jansen
Pierros Papadeas
Mario Lukas
J. M. Hopkins
Patrick Van Oosterwijck
Alan Kilian
Roddy "Rags" Read
Afrdt
amandaghassaei
Samuel Wantman
Blecky
AVR
otter
FrazzledBadger
Hylian
Peggy, Keith and Petyr
Johan
kensbeyShare this profile
ShareBits
ventosus
wrote 08/06/2014 at 06:12
•
point
I'm really curious where this goes. I look at it from a musical point of view and would love to see it used as a bidirectional bridge between software synthesizers and analog synthesizers, to get the best of both worlds...
jaromir.sukuba
wrote 06/14/2014 at 20:46
•
point
Looking at the feed, it seems like you wrote something on my microreader project page, but the comment didn't display there. It looks like the comment disappeared.
ventosus
wrote 06/15/2014 at 07:58
•
point
It was another comment about fast reading. It was redundant as others have pointed it out previously, so I removed it.