0%

0%

lorddissy

Just another maker

USA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/11/2021.

Projects I Like & Follow

An interface breakout board for Raspberry Pi Compute Module 4, permanently attached to a 7" IPS touchscreen display

Raspberry Pi CM4 Сarrier with Hi-Res MIPI Display

sasha-shturma Sasha Shturma

After three years... Supercon again! And the new badge too!

BADGE FOR SUPERCON.6 / November 2022

voja-antonic Voja Antonic

A one stop shop with fixed 5V/12V/24V/USB metered power, adjustable power supply, voltmeter, continuity tester and basic oscilloscope.

Basic Hacker MultiBench

I want to make a scale model VT100 terminal for use with my 2:3 scale PiDP-8/I.

2:3 Scale VT100 Terminal Reproduction

michael-gardi Michael Gardi

2021 Hackaday Prize

A jumperless breadboard

breadWare

kevin-santo-cappuccio Kevin Santo Cappuccio

ESP32 runs FabGL to produce VGA display

ESP32 VGA PS/2

land-boardscom land-boards.com

Work in progress: Flow to synthesize VHDL/Verilog code into a PCB

VHDL/Verilog to Discrete Logic Flow

DSO functions for a CRO

A digital camera for analog oscilloscopes

joseph-eoff Joseph Eoff

A flexible, configurable video circuit for homebrew computers, with shared RAM access and easily-tunable timings

Configurable video output for 6502 computers

A Arduino alarm clock utilizing the RTC module DS3231.

Arduino Alarm Clock

nat-souza Natã Souza

Setting up RFID on a Raspberry Pi using Microsoft IOT Core.

RFID on Raspberry Pi

Hackaday Prize 2020

You can easily control light, fan, and other home appliances with the voice command.

Alexa Home Automation System Using NodeMCU & Relay

Both systems were released in the late 70s and made use of the same* processor. One a computer and one a games console.

Atari 2600 running the Apple 1 Wozmon

johannes-le-roux Johannes le Roux

A really simple CAN network protocol for up to 30 nodes.

CAN Simple (protocol)

A software/hardware solution for capturing current profiles of battery powered devices and optimizing battery life for your projects.

BattLab-One Battery Optimization Software

bluebird-labs-doug-peters Bluebird Labs Doug Peters

An Apple ][ I/O card to control up to four SPI peripherals without the need for bit banging.

SPI Controller Card for the Apple ][

Use a Jaguar or SNES controller as a joystick and a keypad in Atari 2600 and 7800

Wolf

A simple design of a signal booster that can be used to extend the GSM frequency.

GSM SIGNAL BOOSTER v1.0

View all

Bits