0%

0%

GeneralNohacs

I.T. Sr. Project Specialist

dayton

Following Follow me

Similar accounts worth following

This user joined on 06/09/2022.

Projects I Like & Follow

My attempt to build a desktop arcade machine by 3D printing the cabinet and using Raspberry Pi 3 running RetroPie.

Desktop Arcade Machine : 3D Printed + RetroPie

christopher-tan Christopher Tan

The 2018 Hackaday Prize

This open-source, low-power LTE shield uses cutting-edge CAT-M technology and also integrates GNSS location capabilities!

LTE CAT-M1/NB-IoT Shield for Arduino

timothy-woo Timothy Woo

AVR ATMEGA8A Programmong

AVR programming using MS Visual studio code

Connect all needed electronics to NodeMCU, add life to them with a help of programming, install HomeAssistant on PC and let's roll!

Home Automation With NodeMCU, HomeAssistant & MQTT

Use your Wemos motor shield with steppers motors I2C custom slave interface

WEMOS Motor Shield firmware for steppers (I2C)

Build an Arduino Home Automation System that can control electrical devices like lights, fans, garage doors etc using our mobile phone.

Home Automation Step by Step using Wemos D1 Mini w

jithin-sanal Jithin Sanal

68000 Retro Super Computer

Merlin

matthew-pearce Matthew Pearce

Supplyframe DesignLab: 2022 Hackada…

Modular open hardware robot for uROS2 & Microblocks

Rosmo robot

This is an AM radio made out of a Compactron tube, which contains two triodes and a pentode.

Compactron Tube AM Radio

Hackaday Prize 2020

This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.

Open Exosuit for Differently Abled

alex-m-sunny Alex M Sunny

Optical digital audio I/O for Raspberry Pi

Raspberry Pi TOSLINK transceiver hat

nick-sayer Nick Sayer

Use Raspberry-Pi DPI hardware to drive four chains of RGB LED panels.

Improved Raspberry-Pi RGB Matrix Driver

Robert Rouquette

2021 Hackaday Prize

Roamer is a self-charging, switch free, capacitor powered, wandering robot companion.

Roamer, the Self Charging Companion Robot

mike-rigsby Mike Rigsby

Replacing the guts of a broken Powerbook with everyone's favorite SBC

Raspberry Pi Powerbook

dan-jilek Dan Jilek

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

"New technology in the old case" A Raspberry Pi based squeezeelite client for the logitech media server

Squeezelite client - Raspberry Pi Retro Radio

benjamin-prescher Benjamin Prescher

Raspberry Pi Pico vs Arduino Nano RP2040 Connect

Arduino Nano RP2040 Connect Vs Raspberry Pi Pico

In this project, I detail my creation of an affordable quadrupedal robot named ZEUS.

3D Printed Quadrupedal Robot

aaed-musa Aaed Musa

View all

Bits