Close
0%
0%

Shawn Alfaro

I am a tinkerer, a nuts and bolts guy but am teaching myself coding. i build and modify robots.

California
Following
Send a private message
Similar accounts worth following
2 Followers
0 Following
4 Projects
shawn-alfaro
Send a private message

This user joined on 03/03/2014.

3k
10
0
6
In this Episode, we rip out the original controller board and replace it with a Raspberry Pi 4 and a motor driver board
Project Owner Contributor

Mebo Robot Mod with Rasp Pi 4 and Adeept Motor Hat

shawn-alfaroShawn Alfaro

1.2k
3
0
1
My goal is to upcycle this old plotter using off the shelf parts and turn it into a vinyl cutter
Project Owner Contributor

old plotter new tricks with closed loop control

shawn-alfaroShawn Alfaro

153
1
4
1
This project is to convert a spent vape into a dedicated speaker with larger battery
Project Owner Contributor

Vape to Bluetooth Speaker

shawn-alfaroShawn Alfaro

52
0
0
0
I am attempting to cram as many hardware mods into my inexpensive gaming emulator handheld
Project Owner Contributor

R36S Mods

shawn-alfaroShawn Alfaro

234.6k
16.8k
6
192
Low/zero cost upgrades for the Monoprice Select Mini 3D Printer.
Project Owner Contributor

Monoprice Select Mini Maximum 3D Printer Mods

us-water-rocketsU.S. Water Rockets

125.7k
1.4k
26
547
Goal: To assemble a working CO2 Laser from a minimum investment using only tools one can find at your average home improvement store.
Project Owner Contributor

Low Cost CO2 Laser Build

thundersqueakThunderSqueak

48.5k
130
21
105
The 12ft skeleton (Skelly) from Home Depot is an impressive decoration, but needs an extra kick to make it truly incredible!!!
Project Owner Contributor

3-Axis Skull Mod for 12ft Skeleton

nelson-bairosNelson Bairos

47.6k
211
19
118
With carbon fiber tape you can make a high-quality Taser / stun gun proof clothing from your jacket, vest, hoodie, trousers, coat or gloves.
Project Owner Contributor

Homamade carbon tape Taser-proof clothing

shenzhenshenzhen

32k
508
57
176
The latest marlin had ported to stm32 board,everything works, stable and smooth,have BLTouch,etc.
Project Owner Contributor

Upgrade your 3D printer from 8bit to 32bit

robertrobert

29.7k
4.9k
35
98
An affordable modular platform for open robotics development for hackers. Provides a jump start to build your own robot.
Project Owner Contributor

MORPH : Modular Open Robotics Platform for Hackers

roald-lemmensRoald Lemmens

21.4k
3.3k
47
40
Getting Marlin to run on the Monoprice Mini/Malyan M200.
Project Owner Contributor

Monoprice Mini Marlin 2.0 Support

jc-nelsonJ.C. Nelson

16.8k
379
5
44
iRobot Roomba 690 enhanced with a Raspberry Pi Zero 2W and IMU.
Project Owner Contributor

Roomba RPi

josh-gadekenJosh Gadeken

16.8k
141
5
124
Hi, I'm edog, a 3D-printable quadruped robot
Project Owner Contributor

Edog - Mini 3D printed Quadruped Robot ✨

gaultier-lecaillonGaultier Lecaillon

13.3k
1.1k
4
96
A heavier duty 3D printer that replaces 3 machines
Project Owner Contributor

3-In-1 Desktop, CNC and Laser Engraver

samernsamern

10.7k
95
5
47
This project creates paper sewing patterns. A 3D mesh of a body part is created. The mesh is unwrapped to a 2D flat picture and printed.
Project Owner Contributor

Digital Patterns for Sewing

alan-campbellAlan Campbell

9.9k
104
5
47
BunnyBot is a ROS based robot platform that can perform useful tasks using its built in gripper and vision system.
Project Owner Contributor

BunnyBot

jack-qiaoJack Qiao

8.9k
13
3
14
TranspOtter? TranspOtter is an (autonomous) traffic concept that follows you and transports loads in everyday life.
Project Owner Contributor

TranspOtter NG

jana-marieJana Marie

6.8k
33
2
22
Pint-sized DIY Onewheel based on Hoverboard electronics, heavily inspired by ZbLab's progress.
Project Owner Contributor

DIY Onewheel

mattMatt

6.5k
95
1
63
Drive BLDC as direct-drive servo motor
Project Owner Contributor

BLDC motor driver for robotics

mishaMisha

4.8k
33
0
25
A modular, semi-autonomous, omnidirectional robot for telepresent applications
Project Owner Contributor

OMNi

will-donaldsonWill Donaldson

4.5k
3.5k
0
26
A glove you can wear that houses 3 taser units with brass screw electrodes on the knuckles. Button press activation on the index finger.
Project Owner Contributor

DIY Taser Glove

tommy-callawayTommy Callaway

3.9k
3.6k
4
38
This is a self balancing robot created by star wars fan, with autonomous behavior, FPV and remote control modes
Project Owner Contributor

Droid Trooper

victor-serranoVictor Serrano

View all

Share this profile

Share

Bits

Send a private message to Shawn Alfaro

Become cool instantly

Create your Hackaday.io profile like Shawn Alfaro and many others

Report user as inappropriate

You are about to report the user "Shawn Alfaro", please tell us the reason.