0%

0%

kevin

aprender mas de uds

peru

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/27/2020.

Projects I Like & Follow

Universal enclosure that can be used as a lab power supply, soldering station or combination of two.

Modular PSU & Soldering station

The LoRa Transmitter project uses the general clock output on a ELB-REV4 to produce frequency modulated radio communication.

LoRa Based FM Voice Communication

Hackaday Prize 2020

A GPS controlled Spotlight Drone

Lumos - Spotlight Drone

Reverse-Engineering a random MIPI-HDMI bridge from China

MIPI-HDMI Bridge RE

Single pole 6 throw RF switch ; 3 bit control channel ; 3-5V operation ; Decent isolation ; low insertion loss ; Tinker board add-on.

SP6T Wideband RF Switch (5 - 3000 MHz)

Aditya Mukherjee

Clock that chimes on the hours, halves, quarters

Chiming Clock

An Open Source external module for powering a stock TS100 Soldering Iron using USB C Power Delivery

TS100 Flex-C-Friend

The Janus Controller is a Brushless motor driver with an on-board magnetic encoder for position and velocity control.

Janus Brushless Controller

My take on an autonomous satellite image collector grabbing from NOAA 15/18/19. (Leave Behind - Collection Device)

NOAA LB-CD

Hackaday Prize 2019

Omnidirectional 3D printer for... Houses?

Omniprinter - #Swarm 'Large Scale 3D Printing'

Online course covering intro topics about signal acquisition and processing. Assumes no more than High School math skills

Signal Processing techniques for Beginners

Learn how to go from KiCad 3D exports to photorealistic renders in Blender

Remoticon: KiCad to Blender > PCB renders

A CircuitPython dev board designed for breadboards! With adjustable voltage rail, multiple GPIOs and a 1.3" 240x240 LCD.

Serpano

Simple USB Power Tester based on ATtiny45/85 and INA 219.

USB Power Tester

Experiments with polyphonic pythonic tone playing

Adventures in Bleep Bloops with CircuitPython

Simple USB-C Power Delivery Tester based on ATtiny45/85 and INA219

USB-C Power Delivery Tester

This clock is accurate to +/- 1 sec/month without relying on GPS or NTP synchronization. The RTC is implemented in firmware.

A Very Accurate LED Clock

Buck Boost DC-DC battery charger. 4.5-55V input, up to 60V output. Support for Li-Ion, Lead Acid and CC/CV multi-stage algorithms.

Multi-Chemistry DC-DC Battery Charger

Steven Merrifield

View all

Bits

Thomas wrote 09/02/2020 at 05:04

Thanks for the follow! Also check out #eForth for cheap STM8S gadgets :-)

Are you sure? yes | no