0%

0%

Dominik Dancs

Tinkerer and hobbyist. Love electronics and coding!

Following Follow me

Similar accounts worth following

GitHub

This user joined on 02/04/2021.

Projects I Like & Follow

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

Full-on Spotify scrolling and streaming via a Raspberry Pi Zero W and the original iPod clickwheel. Bluetooth, WiFi, and haptic feedback!!

sPot: Spotify in a 4th-gen iPod (2004)

guy-dupont Guy Dupont

Hackaday Prize 2019

A low-cost, high-performance bipedal walking robot

Blackbird Bipedal Robot

Hackaday Prize 2019

LP3D is an (almost) fully lasercut, low component count 3D printer with all linear motion components cut directly into the frame.

LP3D: A fully lasercut kit 3D printer

My goal is to design a 3D printed standalone speaker based on transmission line theory - info: Martin J. King - http://www.quarter-wave.com/

3D printed Bluetooth speakers - LittleJet!

davide-ercolano Davide Ercolano

Add an ESP8266 to a Philips LivingColors gen1 to control it over WiFi without losing the ability to control it with the remote

Philips LivingColors gen1 WiFi addon

Project of metal 3D-printer for printing unique metal parts, by using welding wire, induction heating and other physics)))

Metal 3D-printer based on induction heating...

sergey-r Sergey R.

Hackaday Prize 2020

The New Dexterity Low-Cost Robotic Airship for Education and Research

A Helium-Based, Affordable Robotic Airship

new-dexterity New Dexterity

Experimenting with 3D printed tools.

3D Printed Opensource Tools

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

A small autonomous robot which will “see” and follow the line and take decision when it sees a turn by itself.

Simple Line Follower using Arduino

jithin-sanal Jithin Sanal

An analog clock that displays the time using WS2812 LEDs instead of physical hands.

RGB LED Analog Clock

jackw01 jackw01

Comparatively huge heat sink for Raspberry Pi sourced from old PC case

Raspberry Pi Heat Sink Recycled from PC

jeremy-s-cook Jeremy S. Cook

The main goal of this project is to design a Voice-Controlled Home Automation System without replacing the existing Switchboard.

IoT at just 7$ in your existing switchboard

A multi-track, multi-layer Audio Looper for use in a iive Guitar performance setting running on an rPi in bare metal with a 3D printed case.

rPi Bare Metal Audio Looper

patrick Patrick

Retro arcade style hardware

Bomb Jack display hardware

martin-piper Martin Piper

An Apple ][ I/O card to control up to four SPI peripherals without the need for bit banging.

SPI Controller Card for the Apple ][

An Internet Radio receiver based on ESP32 (D1 Mini), a DAC and two 12 LEDs rings showing "real time" audio spectrum by colors.

(Funny) Audio spectrum by colors

View all

Bits