0%

0%

Ivan Jelušić

CEO at @uplugme, In love with numbers, hardware and technology.

Sofia/Osijek/Požega/Kaptol

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

twitter

This user joined on 11/13/2015.

Projects I Like & Follow

The 2015 Hackaday Prize

This is a micro-quadcopter I'm building from scratch using an Arduino Pro Mini, MPU6050, Nrf24L01+ modules and coreless motors.

Quadcopter from scratch

The 2015 Hackaday Prize

FabScan PI is a Stand-Alone Web-Enabled Raspberry Pi based Open-Source 3D Laser Scanner

FabScan Pi - 3D Laser Scanner

mario-lukas Mario Lukas

The 2015 Hackaday Prize

Rasky is an expansion board for raspberry pi model 2, a collection of software and some 3d models to build an open source KVM over IP

Rasky, raspberry pi 2 KVM over IP

franco-nextime-lanza Franco (nextime) Lanza

75x40 mm, 6 layer PCB, Xilinx XC7Z7010 FPGA, dual core ARM Cortex-A9, 32Mbyte Flash, SD, microSD, Bluetooth, 100 mil headers, single 3.3V

Open Source HW: Xilinx ZYNQ7000 System on Module

antti-lukats Antti Lukats

Build a p2p net of Arduino based devices using Ethernet, Wireless and USART. Control over Android and openHAB. Like ZWave, but opensource.

Arduino Smarthome and IoT Networking Framework

The 2015 Hackaday Prize

a tiny-but-scalable three-ish axis-system *from* laser-cuts

2.5-3D thing

eric-hertz Eric Hertz

[DISCONTINUED] An inexpensive bluetooth music system for cars with lacking stereos.

carbt_v1

Controlling TV volume with the house thermostat. If you're thinking WTF? click through for details!

Thermostat Controlled TV Volume

alex-rich Alex Rich

Official Hackaday Prize Entry

The Arc printer is a rapid printing 3D printer with minimal moving parts designed to print objects in minutes not hours.

Arc Printer

There's always room for Pi in your Amateur Radio Go Kit. Top it off with the Pi-Go and plug right into your station power - or even your car

Pi-Go

bob-recny Bob Recny

Hackaday Prize 2020

An Open Source Pick and Place Machine built on TinyG, Chilipeppr. Beaglebone Black, and OpenCV

Picki

This is my first try in making Toys. I am building a baby mobiles with LED's which are controlled by an Arduino and an old Apple Remote.

Arduino Controlled LED Baby Mobile

mario-lukas Mario Lukas

Official Hackaday Prize Entry

Helping traditional air conditioners join the Internet of Things.

Aurai - retrofit dumb air conditioners

thomas-r Thomas R

This is a lowcost rf module designed to link sensors etc to a home automation setup..

Yet another Home Automation Wireless Doodad!

This project is based on mbed WIZwiki-W7500 platform launced by WIZnet. WIZwiki-W7500 can connect to the smart IoT cloud server - thinger.io

mbed WIZwiki-W7500 platform with Thinger.Io

The 2015 Hackaday Prize

Open source development platform for learning electronics, robotics and programming.

Oktopod: Dev Kit for Robo-ideas!

oktopod-studio Oktopod Studio

A kit that demystifies robots for children using first assembly, then sequential programming.

HAL-e Robot Kit for Kids

A Web-enabled puppet that turns on your TV when Simpsons is on.

Smart Homer Web-enabled TV remote

tamberg tamberg

View all

Bits